84mm scissors
-
Do the back springs differ?
-
Got any pictures?
-
I took apart a Wenger today and here are the pics comparing the Wenger 85mm and Victorinox 84mm scissors.





The pivot holes are aligned, the wenger having a 2.5 and the vic 2.2 mm holes. As you can see, not an easy swap. You would have to grind of quite a bit off of the wenger scissors and that's the easy part. The part on the back of the scissors where the backspring rests/locks the scissors in open position is shorter on the Wenger. I put it back together so no more pics. But feel free to ask if any of you have any more questions.

-
How do the back springs differ? I might have to take one of mine apart to find out. Do Wenger scales go back on? I have poor luck with Vics.
-
You can't use wengers backspring cause of the middle hole, and the victorinox spring is a bit shorter on the end where the scissors go.
As for the Wenger scales, MUCH better than the Victorinox. I took my white pair off and on about half a dozzen times and they still fit perfectly.
-
I have never taken a Wenger apart. Do the rivets work the same as Vics? I am just going to have to jump in.
-
@GigaHz said:
I have never taken a Wenger apart. Do the rivets work the same as Vics? I am just going to have to jump in.No completely different principle. The pins are pinned to the liners, like to the scales on the alox models, so without the extra bushings, and the scales attach to three attachment points, raised parts of the outside liners, you can see them on one of my previous pics. I actually find modding Wengers easier than Vics, I don't understand why more people don't do it. In the last year or even more, the only ones that I've seen doing Wenger mods have been Rahmed and I. And I find Wenger has a much cooler tool selection to choose from.
-
Id love to get my hands on more wengers but they are very scarce over here and ordering even the entry models costs way way more than vics do thats why I dont have many. I have the wenger with nail clippers and that cost what 2 alox pioneers would.
-
You need parts? I've got parts. :D (also a better pic of the outside liners with the scale attachment points in the lower right corner)

I understand your problem. I can't get any Wengers around here any more. There are a couple of shops on line that still sell them here, but they are way overpriced. I try to find used ones in good condition on ebay for parts. I'm still kicking myself for forgeetting to bid on a Wenger Nomad two weeks ago. Locking blade, universal wrench and phillips for a little over 10usd with international shipping. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login