MP450?
-
It's cool either way Cap.
I was mostly interested in the plier design, and I won't sweat if it comes with scissors or file. And both of the blade designs pictured above are fine with me.
EDIT: Remember, I had to start a thread to even find out what it was, so... yeah... not too concerned. :D
-
@Lynn LeFey said:
It's cool either way Cap.I was mostly interested in the plier design, and I won't sweat if it comes with scissors or file. And both of the blade designs pictured above are fine with me.
That plier design is quite addicting. :) I know for a fact it has Scissors I just do not remember if it has a file as well. If they never offered a model with both than I assume it is a MP400.
-
@Capt'n and Lynn, had a good gander at that pic, I'd say its an MP400 with the Wharncliffe blade and no file, same as this one


-
Okay... so... never mind. I can find plenty of reviews on the MP400. Nothing to see here, move along! :D
So... I have an MP400 on the way. Thoughts? :D
Also, they're issuing the MP600 to military folks? I think I saw something in a Nutnfancy video where he mentioned it coming with a vest or something (body armor maybe?). Yeah, I know some folks have issues with him. I can get past it and appreciate the level of detail in his reviews, even if I don't always agree with him.
-
Oh look, what's this sitting right beside me? Why, it's an MP400! :o
:D
Badwolf's right, no doubt about it, that's an MP400 you've got coming. One if the inconsequential differences between the two of them is that the components are installed in rather different orders. So the fact I can see a can opener next to the 'Gerber USA' stamp means it's definitely a MP400, if it was a MP450 you would see the phillips head 'driver.
In all honestly they are both good MT's IMO. The scissors aren't the most delicate out there for detail work, but they are tough little things and cut very well.

-
@Lynn LeFey said:
Okay... so... never mind. I can find plenty of reviews on the MP400. Nothing to see here, move along! :DSo... I have an MP400 on the way. Thoughts? :D
Also, they're issuing the MP600 to military folks? I think I saw something in a Nutnfancy video where he mentioned it coming with a vest or something (body armor maybe?). Yeah, I know some folks have issues with him. I can get past it and appreciate the level of detail in his reviews, even if I don't always agree with him.
My thoughts exactly. I personally have no problem with him, but some people do. To those of you who hate him I challenge you to put out a better review video of your favorite MT or SAK. :D
-
@Lynn LeFey said:
Also, they're issuing the MP600 to military folks?Yes they are.


That one pictured was my first 600, with the issue sheath.
-
I saw a video talking about the plastic molle attachment on the back of the sheath. You having any problem with that?
Also... Oooohhhhh.... Replaceable cutting heads on the pliers. that seems to be a 'thing' on the larger tools these days. Nice, if they keep making the replacement blades.
-
@Lynn LeFey said:
I saw a video talking about the plastic molle attachment on the back of the sheath. You having any problem with that?Also... Oooohhhhh.... Replaceable cutting heads on the pliers. that seems to be a 'thing' on the larger tools these days. Nice, if they keep making the replacement blades.
Nope, never had a problem with the molle attachment. I actually don't own that exact tool anymore, I traded it to Mercury here for another BO MP600. The one pictured above was in such beautiful shape I felt it would be a shame to use it. The ones I have now are still in great shape, but users. :) Besides, it was Merc's MP450 I got, and a felt a bit sorry for him....... ::) As for the replaceable cutters, if I ever wear a set out, I'll let you know how swapping them goes. :P
-
@Lynn LeFey said:
Also... Oooohhhhh.... Replaceable cutting heads on the pliers. that seems to be a 'thing' on the larger tools these days. Nice, if they keep making the replacement blades.Note that the blades there are triangular in shape. So when they are dulled/damaged, you loosen the screw, rotate the blade 120°, and you're good to go again. Each set of wire cutter blades is good for three tours of duty. :D
-
I noticed they were triangular, but couldn't tell for sure if they had three edges. Good in a way, but it means the whole force applied to them gets put on the screw holding them in place, and the two 'unused' cutting edges. I'm curious how well that works in practice.
-
Wohoo! The MP400 is here! Let the obsessive plier flicking begin.
Worse than that, they came in a box with bubble-wrap!
I'm the best at what I do, and what I do is (snict!)... extend pliers! :D
Okay, maybe funnier if you're an X-Men fan. -
@Lynn LeFey said:
Wohoo! The MP400 is here! Let the obsessive plier flicking begin.Worse than that, they came in a box with bubble-wrap!
I'm the best at what I do, and what I do is (snict!)... extend pliers! :D
Okay, maybe funnier if you're an X-Men fan.:) Now you need an MP600 for the other hand to truly do a strange Wolverine impression......
-
Remember a cowboy hat and sideburns... :D
-
And a cigar. And a motorcycle.
Bub!
-
A adamantium skeleton wouldn't hurt either. ;)
-
Those are in short supply these days so they keep capping my bones in steel and titanium.
Def
-
Okay, so I've had the tool for a few days and played with it a little.
Wire cutting on 12-gauge wire and scissors tests have been posted elsewhere, but in brief, it cuts wire okay and has excellent scissors on par with the Wave's.
I'm still not thrilled with it, and still don't know why. I have a suspicion that it's a combination of the finish and the use of space. It feels lighter by volume than a leatherman, so it sets off something in my brain that says 'cheap'. I know it's not the case, but that's logic, while my dislike for it is something I can't put a finger on.
Other than the blade. It is an utter POS (at least the edge is). However, considering its thickness, it might very well be a very stout POS. :D
I really like the drivers. Played with them just a bit. The phillips in particular is excellent. Can opener reviewed elsewhere, but works middle of the road well.
I was trying to find a comp in Leatherman, and it comes close in function to the Wingman. Of the two, I'd rather have a Wingman. The strong retention of the tools on the Wingman is close enough to locking for the internal tools, and the big one, the blade, locks. Scissors on the MP400 are without a doubt better, but slower to access, and the scissors on the Wingman are perfectly adequate for day-to-day tasks. The Wingman's drivers have longer reach. There's really no loss of a bottle opener on the Wingman since its can opener will lift caps. The OHO blade on the leatherman (also a semi-serrated) is OHO AND comes very sharp. If I were doing hard (potentially damaging) work with the blade, I'd prefer the MP400. As I mentioned earlier, it's a pretty stout blade. I really REALLY don't like having to open the plier head every time I need to access another tool. I have no need for instant access pliers, and if I did, I'd carry the SOG Powerlock instead. Yes, this may be the only time you ever hear anyone EVER say they'd pick a Wingman over anything else. :D But the truth is, the most likely tools I'll need are blade or scissors.
No regrets in getting the tool. Excellent if for nothing else than seeing how other design paths work. Overall, not a bad tool, just not to my taste.
Now, I just need to do a mod to put the MP400 scissors on the Wingman. :D
-
Haven't been on in a while, its good to be back.
I saw this on Ebay and it got my interest. First time for a Geber for me in a while, I hope they win back a piece of me. I used to love Gerber value for the $ was great. Then they lost me on the quality. I hope they are beginning to turn things around.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login