Making your own backspring?
-
You can use almost any blade steel, and higher stainless steels for springs. I know 410 stainless works well and is affordable. Heat treating is required though you have to harden and oil quench a few times, then air cool for a final round and end up at 45 RC ideally. Not something you really want to do to make just 1 spring though.
If steel doesnt have the spring temper done to it, it wont spring back and will just stay bent eventually. What you could do, is if you could find a spring similar thickness from a different folder, you can file shape those without adding heat and can reuse them that way. I do that for SAK modding when I dont have a spring the right shape.
-
I'm not sure if that would work, since the PS spring is a lot like the back springs used on the micra. Plus, I think the PS is too small to accept a spring from a folder. Would one from a 58mm sak work?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

