Opinel advice needed
-
I'm wanting to do a little bit of modding.I havnt quite decided whether its going to be to a No7 or 8,but what I'd like to do is rip the handle down and stain it black.Any ideas on what I can use as the stain?
Also,I've heard that you can use olive oil to creat a patina on the blade.has anyone heard of this?
-
Not sure what you could use to stain the handles but as far as I know (very little) the olive oil would not do much on the blade. It is actually used to protect it from getting a patina, that basicaly is a layer of oxidation on the surface. You can use things like hot sauce, vinegar and mustard. I'm not an expert so if anyone could correct me, feel free to do so. I hope to have helped!!

p.s. Looking for the results of the mods
-
Olive oil won't really patina the blade, like WWW said. I used an orange and mustard on a Case Trapper and Sodbuster Jr with carbon blades, and was happy with the results of each. As to stain, I'm not sure if it's available in the UK, but I use a company called Zar. It's a heavy bodied, pigmented stain that covers well if that's the effect desired. I coated the handles of my Opinels with three coats of acrylic polyurethane after the stain dried and it worked perfectly. Of course, I cheated a bit - I work in a paint store, and all the materials were free..... ::) :) Basically a heavy bodied or gel stain will give you the best results. Avoid a watery penetrating stain, you;ll drive yourself crazy with the number of coats you'll need to get a decent color depth.
-
Anything acidic will give you a patina on a carbon blade. Oranges, apples, juices... mustard can be used for a patterned patina.
-
I de-grease the blades and wrap them in paper napkins. Wet the napkins with white vinegar.
I did this blade swap because I wanted carbon steel blades with Olivewood handles...something the factory does not offer.


-
I rubbed black shoe polish in the handle of a #8 to make it darker, i think if you watered some down and soaked the handle it should go black, ive also used food colouring :D as for the blades they patina easy, as said orange,potatoes,apples, but for a quick reaction vinager :ahhh :D

-
As above or
'Van Dyke crystals' for the wood and cheap Tescos vinegar for the blade

Crystals, http://www.thestickman.co.uk/tools.htm
Or have a look here if you get a min :D
-
Nothing stains a blade as ridiculously quickly as kiwis in my experience. :) I guess it's the oxalic acid... also good as a meat tenderizer.
-
John the best thing I know of for a patina is to stick in an apple and walk away for a while.

Sent from Ash forum mobile
-
Thanks one and all!Its given me quite a lot to think about!May end up doing 2 or 3 Opinels on the back of this!
I've bought a No8 Carbon,but cant make my mind up over a Inox,or a Slimline,so in the best traditions of the forum,I'll probably get one of each :D,or a few smaller ones as test mules.Needless to say you'll get to see the results good or bad.
How difficult is it to remove and replace,or exchange blades?
-
If you can rivet a SAK together, then you should have no problem. The hardest part is forming the heads on both ends of the pivot so that the locking ring is secure and turns smoothly.
-
I've been testing a stain on the oppy handle for the last week or two



Its been stained using GamesWorkshop black ink! :o II've been leaving it to crash around in my work trousers for a couple of weeks to test durability,and as you can see it has a nice look to it.Its since had a coat of matt varnish layed over it
-
I like it Kirk, its given it a nice aged look
get a patina on the blade next :D ;) -
:o Totally changes the look of the knife
Nice job

-
My red #8 says hi :D

-
It looks like you may have already found a stain for the handles, but I'll toss my 2 cents in anyway.
The beech wood that is used in the handles of most opies does not accept a pigmented stain well because the tight wood grain does not have many places for the pigment particles to settle into. Dye stain will give you better results because it will dye the wood fibers. The Van Dyke Crystals that Sparky recommended are a type of dye stain made from natural ingredients such as walnut husks. There are also analine dye stains that are available in wide variety of colors. Either of these dyes should be protected with a finish because they will wear off easily.
I'm not familiar with the ink that you used, but I would bet that it is acting like a dye stain.
-
Paul got any recent pictures of the ax handle I did with the Van dyke crystals (Meadmaker
) That is the only thing that I have used the stuff on, has the colour mellowed?
The red Opie looks nice aswell Mate
-
@sparky415 said:
Paul got any recent pictures of the ax handle I did with the Van dyke crystals (Meadmaker
) That is the only thing that I have used the stuff on, has the colour mellowed?
The red Opie looks nice aswell Mate
it looks the same tony as it lives under my stairs and not given it a good workout yet, it will though ;)

-
Paul got any recent pictures of the ax handle I did with the Van dyke crystals (Meadmaker
) That is the only thing that I have used the stuff on, has the colour mellowed?
The red Opie looks nice aswell Mate
it looks the same tony as it lives under my stairs and not given it a good workout yet, it will though ;)

Do you see I am using you as my test subject? >:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
thought i added a pic, oh well, this is with food colouring 