Cerakote process
-
So I was asked to do a run down on the process.......
- Complete dis-assembly
- Degrease
- Heat to get all the hiding grease out of the item
- Degrease again
- Tape off and plug any and all areas you doing want stripped and coated
- Media blast with 100/120 grit aluminum oxide
- Blow off with air making sure not to touch with bare hands.....completely clean.
- Rack
- Mix Cerakote in proper ratio
- Spray Cerakote with good quality HVLP gun
- Let flash cure
- Put parts in oven and sure accordingly
- Once parts cure in oven remove and let cool
- Reassemble and fit all parts and pieces back together
Prep work is key.....you must be very careful to make sure the part getting coated is clean. That means 0 grease, fingerprints, and the surface is roughed up enough to get a proper bond. Quality tools and equipment are important as well. If you are going to do any coating other than the one piece here and one piece there then invest in good equipment. When I first started I was using okay equipment. As I upgraded equipment I saw a world of difference from the okay stuff to the quality stuff.
-
I have exactly zero interest in trying to do this myself, but I'm wondering, what temperature is used in the oven, and how long do the parts stay there? I always get a little paranoid when people put heat treated steel in an oven. ;)
-
For metal you are looking at 250 F for 2 hours. This will have zero effect on a heat treated blade.....done tons of knives.
-
You're talking to a European, I assume you mean Fahrenheit? :)
Anyway, 250 F should certainly have no effect. Celsius would be borderline for at least some steels, I think...
-
I fixed that....yep, Fahrenheit.
-
Very interesting. Thanks for posting

-
Can't wait to see the results live!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login