Bear & Son
-
The Electrician looks perticularly interesting. I think I will have to take a better look at this company. I think because they are a smaller no name brand it kinda flew under the radar.
Anyone own one?
-
I agree with Hawk that electrician tool looks like a very nice tool. Some of the blades/tools look a bit like cheap knockoff ones, but how did they feel in the hand?
-
@Roadie said:
I agree with Hawk that electrician tool looks like a very nice tool. Some of the blades/tools look a bit like cheap knockoff ones, but how did they feel in the hand?The Bear tools give off an aura of strength and quality contruction. No question about it, these tools are solid! However, their designs are a bit dated. They were designed to compete with the Leatherman tools of the late 1990's. There are no fancy thumbhole knife blades or titanium scales. The lock release mechanism is particularly old fashioned.
The blades themselves are somewhat crude, but again are of good quality. Far and away better than the cheap Chinese junk!! I usually judge blade quality at a glance by looking at the phillips screwdriver. (Ever notice how the Chinese cannot seem to produce a decent phillips?) The phillips on a Bear tool is big and strong, with crisp form on the driver head.

-
Well thats good news! That philips driver does looks pretty darn good. Yeah the blades/tools don't look very refined and it was mainly this image that had me worried about them. I know the actual pliers are really well built and strong.

-
@J-sews said:
The Bear tools give off an aura of strength and quality contruction. No question about it, these tools are solid! ....I must agree with you, Bob, based on the Cresent ToolzAll Pro. It was made by Bear.
The lanyard hole blade is strange, though. If you open the lanyard blade and thread a split ring or paracord through the hole, there is no room to open the flat screwdriver blades which are adjacent.
I prefer the Leatherman SuperTool and PST lanyard attachment arrangement, which is outside the handle.


-
What's the price range on Bears? They look like a nice Mid-quality tool for those who don't want to pay extra just for Brand Name status.
-
@Nomad said:
What's the price range on Bears? They look like a nice Mid-quality tool for those who don't want to pay extra just for Brand Name status.Prices on Bear tools are generally a bit less that their Leatherman equivalents. The challange can be trying to find one for sale. I've never seen one at a store, only at internet retail sites.
-
I was wondering about that myself. It appears to be part of the tool but maybe one of the guys can fill us in first-hand.
-
@Tsquare said:
I was wondering about that myself. It appears to be part of the tool but maybe one of the guys can fill us in first-hand.The nail clipper & multitool is actually a Bear Jaws model 157LN (<u>L</u>ocking, <u>N</u>ailclipper) An ordinary fingernail clipper is attached to the tool by means of a slot cut in one handle. The rivet from the clipper goes through the slot, and the clipper's spring pressure keeps it from falling off. A little bent piece of steel retains the "tail" of the clipper.
The 157LN first appeared a few years ago. (I don't know exactly when) It seems like an idea with possibilities, but then again...... ::)


-
:o
That's the weirdest multi tool function I've ever seen.How does it fit in a sheath?

-
@Corrugated said:
:o
That's the weirdest multi tool function I've ever seen.How does it fit in a sheath?

Awkwardly. :D
-
Anyone know a good source of the newer designed models? Just hoping someone here may have some idea.
-
That clipper model goes to show how sometimes the designers can go way off base and just start to add stuff they think people want. It also looks like the thing was added to an original tool. Look how the cut out for the mounting goes through the company name. ::)
-
@hawkchucker said:
That clipper model goes to show how sometimes the designers can go way off base and just start to add stuff they think people want. It also looks like the thing was added to an original tool. Look how the cut out for the mounting goes through the company name. ::)It does seem like somewhat of an afterthought don't it? :-\
-
That tool is the definition of after thought. :D They couldn't have made them look more stuck on if they tried.
-
Is there a significant advantage to this particular design of outside opening tools? Is SAK's design exactly the same?
-
@carl said:
Is there a significant advantage to this particular design of outside opening tools? Is SAK's design exactly the same?Not particularly.
The Victorinox design is significantly different than Bear's and much better in my opinion. It is much more "snappier" and more orderly and has a much better lock interface. The plier pivot ramps function and are designed different for the respective tools also, I would do a nice picture comparison but my Bear Jaws is in storage. May be time to get a locking model and check it out. :)
I think the Bear tools may be stronger to failure in regards to handle torque since their handles are a one piece stamp, as opposed to the three piece system used on the Spirit. But then I am fairly certain the individual tool would break before the handles failed.
Hmm.
Does the SwissTool share the same three-piece handle design as the Spirit?
-
I'm glad to hear that SAK did their homework and didn't just directly transfer the Bear's design over to their tools. That would have been a tad disappointing. Great piece of history to know about the purchasing of the companies, the buying back, etc.
Does something about the SAK Spirit require a 3-piece design - is there an advantage of the 3-piece over the one piece? What was SAK's thinking on that? Maybe just simpler or cheaper to manufacture with little or no strength disadvantage because, like you say, the individual tool is the weak link, not the frame.?
-
Yup, the SwissTool handle is three-piece construction as well. (Actually both it and the Spirit handles are four-piece construction, if you count both side panels, the finger backspring panel, and the plier pivot bracket)
I can see why the finger backspring panel is a seperate piece; it probably needs to be made from thicker spring-grade steel. But why make the side panels two seperate pieces?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
