Bear & Son
-
I was wondering about that myself. It appears to be part of the tool but maybe one of the guys can fill us in first-hand.
-
@Tsquare said:
I was wondering about that myself. It appears to be part of the tool but maybe one of the guys can fill us in first-hand.The nail clipper & multitool is actually a Bear Jaws model 157LN (<u>L</u>ocking, <u>N</u>ailclipper) An ordinary fingernail clipper is attached to the tool by means of a slot cut in one handle. The rivet from the clipper goes through the slot, and the clipper's spring pressure keeps it from falling off. A little bent piece of steel retains the "tail" of the clipper.
The 157LN first appeared a few years ago. (I don't know exactly when) It seems like an idea with possibilities, but then again...... ::)


-
:o
That's the weirdest multi tool function I've ever seen.How does it fit in a sheath?

-
@Corrugated said:
:o
That's the weirdest multi tool function I've ever seen.How does it fit in a sheath?

Awkwardly. :D
-
Anyone know a good source of the newer designed models? Just hoping someone here may have some idea.
-
That clipper model goes to show how sometimes the designers can go way off base and just start to add stuff they think people want. It also looks like the thing was added to an original tool. Look how the cut out for the mounting goes through the company name. ::)
-
@hawkchucker said:
That clipper model goes to show how sometimes the designers can go way off base and just start to add stuff they think people want. It also looks like the thing was added to an original tool. Look how the cut out for the mounting goes through the company name. ::)It does seem like somewhat of an afterthought don't it? :-\
-
That tool is the definition of after thought. :D They couldn't have made them look more stuck on if they tried.
-
Is there a significant advantage to this particular design of outside opening tools? Is SAK's design exactly the same?
-
@carl said:
Is there a significant advantage to this particular design of outside opening tools? Is SAK's design exactly the same?Not particularly.
The Victorinox design is significantly different than Bear's and much better in my opinion. It is much more "snappier" and more orderly and has a much better lock interface. The plier pivot ramps function and are designed different for the respective tools also, I would do a nice picture comparison but my Bear Jaws is in storage. May be time to get a locking model and check it out. :)
I think the Bear tools may be stronger to failure in regards to handle torque since their handles are a one piece stamp, as opposed to the three piece system used on the Spirit. But then I am fairly certain the individual tool would break before the handles failed.
Hmm.
Does the SwissTool share the same three-piece handle design as the Spirit?
-
I'm glad to hear that SAK did their homework and didn't just directly transfer the Bear's design over to their tools. That would have been a tad disappointing. Great piece of history to know about the purchasing of the companies, the buying back, etc.
Does something about the SAK Spirit require a 3-piece design - is there an advantage of the 3-piece over the one piece? What was SAK's thinking on that? Maybe just simpler or cheaper to manufacture with little or no strength disadvantage because, like you say, the individual tool is the weak link, not the frame.?
-
Yup, the SwissTool handle is three-piece construction as well. (Actually both it and the Spirit handles are four-piece construction, if you count both side panels, the finger backspring panel, and the plier pivot bracket)
I can see why the finger backspring panel is a seperate piece; it probably needs to be made from thicker spring-grade steel. But why make the side panels two seperate pieces?

-
I really like the look of these Bears. From the UK I would guess Ebay USA is the best place to get them. -
I've used Bears/Toolzalls for several years and despite their admittedly dated and somewhat eccentric designs, they inspire trust with their robustness. I think their handles are the most comfortable in the business-rounded and they fit my hand very well and the tool access is great (though Bear often puts the nail nicks in unusable places). I used the Electrician on sound jobs and it was great. The lanyard attachment is a joke (it can't close with the lanyard attached) and the Phillips screwdriver is odd at first, but I believe it was designed to mate with a Bear accessory drive kit (which no dealer I've been to has ever carried). Oddly, the Toolzall re-brands seem a bit better fit and quality than the standard Bears. Perhaps Crescent kept an eye on the tolerances, perhaps it may just be my own tools. Why Bear isn't a bigger player is beyond me...
-
I have seen their tools at sears, sportsmans warehouse. and industial supply. sears is about everywhere and ther are quit a few sportsmans warehouse around. you may find something there.
-
The only downside to the early Bears were they were non-locking.
Combine that with the fact they were outside opening and you have to learn to say "ouch"I used them a lot and learned to be very wary.
-
Ken is indeed a great guy. He's been helping me with my Electrician's Bear Jaws issues. If Bear did a little to update their designs, I think they could truly have a place in the market. That said, the Electrician's tool is really impressive, and the only full size multi on the market to offer strippers. Why more people don't know about it is beyond me.
-
The main reason is that alot of times electricians need to work with live wires and with the design of these tools like they are it could result in a very unpleasant little jolt. That being said one should turn off the power before attempting to service electrical wires.
-
As one who does a fair share of theatrical electrical work, I can say that no sane electrician, that is to say, anyone who does electrical work regularly, would be working on live circuits without the proper tools. If you go to Home Depot, the vast majority of the high quality Klein tools they sell in the electrical tool department are NOT meant for use on live circuits. There is a small selection of tools specifically designed and insulated to be used with live circuits, and even these must still be used with care. Whenever it is possible, we try to avoid working on live circuits.
-
@hawkchucker said:
Anyone own one?I'm looking at a 156L multitool real hard - appears they can be customized / modified somewhat with Torx screws holding them together.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login