I broke 10!
-
Well, I know that relatively speaking, this is really small potatoes, and that most of you guys have lost more SAKs than I now have, but I just got my 11th SAK!
I am now the proud owner of the following:
Wenger EvoGrip 81
Vic Executive
Vic Compact
Vic Explorer (Pre '05)
Vic Cybertool 34
Vic Cybertool 41
Vic Swiss Champ (Pre '05)
Vic Hunter
Vic Outrider (modded by Steve, now sans saw blade)
Vic Work Champ
Wenger PER Ranger 179And, I will be buying a CT Lite from GigaHz shortly, for an even dozen! :D
My CT34 is rather old and in bad shape, so it's destined to become a donor tool. I'm planning on transplanting the pliers layer and hook spring to the Explorer, so it'll be a pre '05 model with the screw in the scissors, but also have the backside hook. The bit driver layer will go into my Compact, and in so doing become my perfect pocket EDC SAK. I'm not sure I want to tackle doing a mod on the 111 mm models, so I've been talking with Steve about him transplanting the scissors/phillips layer from my Outrider into the Hunter. Then it'll be my perfect camping/hiking SAK.
I guess that'll bring me back down to 10 once it's all said and done, but still... as of today, I've officially broken the 10 SAK total! Woo hoo for me!!! :D
-
I have 3, so you're WAY ahead of me.
But I have a number of other non SAK MTs. 17ish? Something like that? Still tiny by the standards of this site, I think.
-
It's hard to stop. I see why alot of folks like to collect SAKs. Each one is a bit different, and its hard to judge from pics if you will like a different style or not, so I end up buying 1 of each type to try out and play with. :D
If you want something vic like and cool to try, grab a 2 or 3 layer 108mm safari model. They are just different enough to need one in a collection, and they larger size feels extra cool IMO.
-
If you ever get into collecting SAKs...there is no end to it.
Considering that I never got into SAKs until I became a member here. My first experience as a kid with a SAK like object biased me towards not liking anything that resembled that piece of junk from my youth.
As such, I hesitated for a few months after joining this forum. One day, I walked past an engraving store with a few Wengers for sale. I bought them and quickly changed my opinion on their quality.
Then I found SAKWiki, and that got my interest up big time. Just be careful now, it is a slippery slope and the shallow water doesn't go all that far either. :D
-
Just like when you had your cherry popped. But SAKs are far more important!!

-
Oh jeez... I'm avoiding alox and 108 mm models... and 54 mm ones as well (they're just too small for my fingers)... between 91 and 111 I've already got my hands full!
And, I keep getting new ideas for mods all the time.
I remembered that I had a Ranger when I was a bike messenger, like, 20+ years ago. I don't know what ever happened to it though. Oh well.

-
The 54mm and alox are the best ones though

-
OMG no alox at all! Alox is THE reason I even got into SAKs (I never heard of it before joining up here). You gotta grab a soldier or a farmer!
-
Heinz,
I very interested in what all is wrong with your CT34. It does concern me that a relatively new model could fall into disrepair this quickly.
Could you describe what's wrong? (Oh and pictures are always good. :D)
-
@Mr. Whippy said:
Heinz,I very interested in what all is wrong with your CT34. It does concern me that a relatively new model could fall into disrepair this quickly.
Could you describe what's wrong? (Oh and pictures are always good. :D)
It belonged to my wife; bought and paid for by her work several years ago. (It was one of the things that her boss at the time told her to keep, because it was below the inventory/accounting cut-off in price.)
There's nothing strictly wrong with it, except a serious build up of gunk and some rust on a few of the parts because she never really took care of it, and it sat in bad places for a long time and got a lot of crud dropped on it... The scales were completely thrashed too, so I replaced them with some beat up ones I had, and replaced a couple of missing bits as well. One of the scales I put on it doesn't sit completely solidly on it; it rattles a little bit, and the old scale on that side did the same thing, so I'm thinking there's something wrong with one of the grommets on the pins on that side, but I'd have to check more thoroughly to be certain.
I suppose I could clean it up and get it in good shape again, but I've also been wanting to try my hand at learning to mod. And, I figured since I'm going to buy that CT Lite from GigaHz, I thought it wouldn't be a big loss for me to break it into parts.
I don't know... I'm still not completely sure what I'm going to do with it. I suppose I'll just have to wait and see.
-
Only problem is, I feel like I have to get tweezers out to use any of the tools on one of the small ones. Not that I'm ham-handed, but I have big hands for my size and I always feel like I'm playing with one of my daughter's doll's toys with the little ones like that... And, the blades don't seem like they're big enough to do anything except open envelopes with, and the scissors aren't big enough for anything but trimming whiskers on my beard or in my nose...
I haven't had much luck with them trying to do anything like cutting duct tape, paper, etc.@Syph007 said:
OMG no alox at all! Alox is THE reason I even got into SAKs (I never heard of it before joining up here). You gotta grab a soldier or a farmer!I'd be lying if I said I didn't find the idea of a nice alox appealing, the problem is none of them have scissors, or an inline phillips, which are two crucial tools for me for EDC. The only way I'd ever be happy with an alox for EDC is to have one custom built, and I'm broke enough as it is, trying to support my 91/111 and knife and torch habit...

-
I agree with you on the 58mm models, I find them too small to have much utility. I also have big goon sized hands. The smallest SAK I find practical is the 84mm line. Cadets are my latest curiosity and Im working on putting scissors on a bunch of those.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
