For Powerlock Carriers...
-
As always, you fellows have been a font of advice! I think I'm going to carry the PL a few days and see how I like it. I'm trying to decide whether I want the tool covers. The socket drive just seems so odd that I wondered about changing it. Corrugated, I thank you MUCH for advising me before I got the V-cutter. Regards, Bill.
-
You can use the compound leverage to really torque down with the tool in the almost closed position but be warned you may get a good pinch if you slip off what you are gripping.
-
Believe it or not, I actually use the socket adapter more than I thought I would.
-
Biru, I see the main use of the 1/4" drive as a bit adapter rather than for use with sockets. Would you not find that more useful? You could then carry around many different screw types and be prepared for most things then.
-
Ahhh... Good idea, Benner. I may try that. I have tons of those bits lying around. I think I'll check and see if I have a bit holder handy. I have a sheath with a built-in bit holder in which I used to carry my Gerber Legend 800. I just couldn't get on with the Gerber and retired it for my Wave. I'll see if its bit holder works with that.
My thanks to you all, Bill.
-
@Corrugated said:
... The jaws open wider than any tool I've had, BUT, if you're trying to grip something really wide, you need to use two hands (one on each handle). ...Or position the PowerLock's handles as shown below. The jaws open wider and the gearing permits you to apply force.

-
I've never had to use it in that way, but for an oddly placed nut it might make all the difference if you can't fit the whole extended tool in the area.
-
The super wide opening jaws are actually the reason I traded mine away; for me it was an achilles heel. Never seemed right on anything I tried it on, although to be fair I basically just played with my PL and didn't use it heavily. I have to say though, the reason I only played with it instead of actually using it was that it was just so impractically awkward on the few things I tried to use it on the first few days I had it.
To each their own however, it's definitely well made!
-
@Corrugated said:
... The jaws open wider than any tool I've had, BUT, if you're trying to grip something really wide, you need to use two hands (one on each handle). ...Or position the PowerLock's handles as shown below. The jaws open wider and the gearing permits you to apply force.

Just don't don't do not donut let the clamped item slip out or else expect a nasty pinch that would be the envy of leathermans.
-
@Biru said:
Ahhh... Good idea, Benner. I may try that. I have tons of those bits lying around. I think I'll check and see if I have a bit holder handy. I have a sheath with a built-in bit holder in which I used to carry my Gerber Legend 800. I just couldn't get on with the Gerber and retired it for my Wave. I'll see if its bit holder works with that.My thanks to you all, Bill.
Sorry I missed this earlier.....
Bill, you've probably noted by now that the Gerber bit holder doesn't work on the SOG. The SOG bit driver is made to fit diagonally into a 1/4" square drive socket.
What you need for driving hex bits is an ordinary 1/4" drive, 1/4" socket. (1/4" square hole in one end and 1/4" hex hole in the other) You've probably got one in your toolbox somewhere. :)
-
Also the socket needs to hold the bit somehow...something with either one of those retention wires (don't know the correct term), or a magnet.
I still haven't found anything that would work.
-
@Corrugated said:
Also the socket needs to hold the bit somehow...something with either one of those retention wires (don't know the correct term), or a magnet.I still haven't found anything that would work.
My oops, you're right about that. A 1/4" socket will work, but the hex bit will fall out. :-\
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login