Charge ALX Locks Poorly
-
Alright, sounds good. I feel better now knowing that my "problems" are relatively normal! Thanks for helping me dismiss my hesitation.
-
@Stuey said:
Alright, sounds good. I feel better now knowing that my "problems" are relatively normal! Thanks for helping me dismiss my hesitation.I'm planning on taking a few pics later, so I'll stick some up of my Wave just so you can see. :)
Apart from these niggles, how are you finding the ALX?
-
@Benner said:
I'm planning on taking a few pics later, so I'll stick some up of my Wave just so you can see. :)Apart from these niggles, how are you finding the ALX?
To be honest, I'm more inclined to reach for my Wave than the ALX since I'm not particularly fond of the black alum scales' feel. I'm reallying liking the cutting hook on the serrated knife, although not sure how I'm going to sharpen it.
It's certainly not a bad tool, but I expected more for its extra cost. I haven't really taken advantage of the second bit driver yet, and as far as I can tell, it's only there as bit-storage. I think that the TTI would have been a better choice.
-
Ok, here are the locks on my Wave. I have left the pic really big so you can see it a liitle clearer, although I haven't got the light quite right.

-
I just posted in another thread, the best way I've found to sharpen the gut hook is an EZE-Lap tapered diamond coated pen sharpener. It's a little rod that can close into its own included pen-cap. Made in the US for $5.
-
Yep, thats the same problem my ALX has. The blades collapse on it scary easy as a result. The serrated blade actually tried collapsing on my hand while using the cutting hook.
-
I just checked the locks of my Wave and Charge TTi to make sure I don't have defective locks. I was satisfied with all the locks.
Here are the pix.



-
edap617,
The locks look similar on my Charge TTI, especially for the plain edge blade, the liner lock goes all the way to the frame/handle, which leaves no room for wear but it locks up solid so I don't think I'll worry about it unless it starts to get a little sloppy in time. Is that kind of your thought as well?
-
All of my oho LM MT's all have perfect liner locks. But, my Cabelas Charge TTi has terrible locks-I have heard of someone else having this problem also. But I quick ship to warranty and it is perfect now!
-
Here's trick I tried on my wave just now. If you file (diamond file) off a very tiny amount off of the back of the knife where it bumps into the handle (opposite side of the pivot from your pictures) it lets the knife travel a little farther. My locking liner moved in just a tad bit more into the beveled area on the lock. It's worked great for me. But whatever you do, don't file off too much, then the lock will be sloppy loose.
-
The locks look similar on my Charge TTI, especially for the plain edge blade, the liner lock goes all the way to the frame/handle, which leaves no room for wear but it locks up solid so I don't think I'll worry about it unless it starts to get a little sloppy in time. Is that kind of your thought as well?
I won't worry about that. How can there be wearing if the tip of the lock and the back end tip of the knife will come to a point that they barely touch each other. Since there will be no more rubbing action, further wearing will cease.
Eddie
-
edap617,
The locks look similar on my Charge TTI, especially for the plain edge blade, the liner lock goes all the way to the frame/handle, which leaves no room for wear but it locks up solid so I don't think I'll worry about it unless it starts to get a little sloppy in time. Is that kind of your thought as well?
I won't worry about that. How can there be wearing if the tip of the lock and the back end tip of the knife will come to a point that they barely touch each other. Since there will be no more rubbing action, further wearing will cease.
Eddie
+1, I agree with that.
-
Just to update this, I have noticed that after opening the blades on my Wave many times, that my locks now engage further. Stuey, have you found this as well?
-
I've actually shelved my Charge and use my Wave much more often. The lock has improved slightly since I purchased the tool about a year ago, but it's still not as secure (at least visually) as the Wave. I'm fairly certain it won't buckle under use, and my concerns have eased. I still wonder why so many others have reported similar problems. Perhaps that is why the Skeletool has been delayed, because LM decided not to release tools with less than 100% perfection ever again.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login