Juice S2 Problem?
-
It's not Normal but it happens. It should losen up after awhile and close like it should.
You can always send it back to leatherman and get a different one.
I'd try break it in.
-
I'll try to break it in. I lubed everything up and even tried holding the scissors against the liner (when closed), but no luck.
-
Are they a little bent? The can opener and scissors should touch but not stick to each outer.
The scissors should not touch the liner or just barley.
-
Neither tool looks bent to me. The can opener will not go in unless I press it past the scissors with a little force. When pulling the can opener out (again, with the scissors closed) it rubs against the scissors.
Upon closer examination, I think I found the problem:
Either the "fixed" part of the scissors has too much metal on it, or the "assist" part of the can opener does. These two parts rub together. The assist has to rub past the scissors.How to fix this? I don't know. I tried opening the tools up and lightly bending the scissors toward the outer liner, and then bending the can opener lightly towards the inner liner. No success. There's about 1/8" too much metal for them to both be closed without rubbing.
-
My S2 does that too, although I don't need much force to push it in. I've just learned to live with it. Overall in my opinion the S2 is abit disappointing, not something I would like to see with the Leatherman brand on it. My handles are coming loose, my blade was very unevenly sharpened, tools rub against eachother and the "Leatherman logo" on the pliers was almost ground away. It just feels like a cheap tool to me :-\
-
If it's a issue send it back in to leatherman.
My juice s2 has been a solid tool.
I'm sure thell fix you up with a good one.
-
Mine's like that. I put an chisel edge on the can opener part so it'll open cans better and slide pass the scissors.
-
I've carried an S2 for years, and the can opener and scissors have always interfered a little.
Just learned to live with it. Might try a CS4 where the scissors are by them selves. -
I just received an S2 yesterday (my 3rd, and first gray example), and it does exactly what you are describing, JN. I see this as somewhat of a design shortcoming, but its not a deal breaker.
@jzmtl said:
I put an chisel edge on the can opener part so it'll open cans better and slide pass the scissors.Good idea.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login