OHO Forester issues
-
I just got my new OHO Forester (no pics right now, I'm at work still :P) and I've noticed an issue with it.
When I close the saw it sometimes get caught on the outside liner to the point that it won't close all the way down. It's already made some visible scratches in the outside liner.
Has anyone seen this behavior before? I'm considering trying to just bend the saw blade a tiny bit towards the main blade, that should stop it from snagging, but I figured I'd check with the gurus first. :D
I'll try to get some pictures up if needed when I get home from work tonight.
-
I had the same problem on the "my first Victorinox" from my oldest son, went back to the store with it and after a loooooooong time (about 3 months) and a lot of phone calls got a new one in return. Victorinox customer service is very poor (to say the least) in my country ... ::)
You can read about it here ;).
-
@Top-Gear-24 said:
I had the same problem on the "my first Victorinox" from my oldest son, went back to the store with it and after a loooooooong time (about 3 months) and a lot of phone calls got a new one in return. Victorinox customer service is very poor (to say the least) in my country ... ::)You can read about it here ;).
Considering I ordered mine online (from amazon.de) I'd rather not send it back in. I wonder if it'd be ok to try and bend the saw ever so slightly?
-
I tried bending the saw on the "my first Vic", but it didn't work :(.
However, the saw on the "first Vic" knife is not as long as the one on the forester, so maybe it's a bit easier to bend it, but I wouldn't get my hopes up ...
-
@Northern Geek said:
I had the same problem on the "my first Victorinox" from my oldest son, went back to the store with it and after a loooooooong time (about 3 months) and a lot of phone calls got a new one in return. Victorinox customer service is very poor (to say the least) in my country ... ::)
You can read about it here ;).
Considering I ordered mine online (from amazon.de) I'd rather not send it back in. I wonder if it'd be ok to try and bend the saw ever so slightly?
You should be able to. Ive bent blades a few degrees no problem, so it should work assuming the saw is similar. The way I bend blades is to clamp in a vice and gentle hit with a mallot. For a saw I think I would clamp it so the handle part of the sak is sticking up in the vice and give it a short buy firm shove. Gentle slow pressure wont make the metal have a permanent bent, you have to give a sharp push. Try that but not too far, then check alingment and repeat. That should solve it.
-
@Top-Gear-24 said:
I had the same problem on the "my first Victorinox" from my oldest son, went back to the store with it and after a loooooooong time (about 3 months) and a lot of phone calls got a new one in return. Victorinox customer service is very poor (to say the least) in my country ... ::)You can read about it here ;).
I heard of Victorinox service being excellent.
Was the store a Vic store or a other store? -
I fixed the saw by just holding on to the handle and pressing the saw blade towards the edge of a table.. now it closes perfeclty

Anyone know the point of the small bumps on the liner by the main blade btw? The two "speed bumps" that you notice when opening them.
-
@Northern Geek said:
I just got my new OHO Forester (no pics right now, I'm at work still :P) and I've noticed an issue with it.When I close the saw it sometimes get caught on the outside liner to the point that it won't close all the way down. It's already made some visible scratches in the outside liner.
Has anyone seen this behavior before? I'm considering trying to just bend the saw blade a tiny bit towards the main blade, that should stop it from snagging, but I figured I'd check with the gurus first. :D
I'll try to get some pictures up if needed when I get home from work tonight.
I have the same thing with a ONE HAND MASTER RT and i went back to the store in the same day.

They replaced it with a new one in a few minutes, no questions asked. :D -
@Northern Geek said:
I just got my new OHO Forester (no pics right now, I'm at work still :P) and I've noticed an issue with it.
When I close the saw it sometimes get caught on the outside liner to the point that it won't close all the way down. It's already made some visible scratches in the outside liner.
Has anyone seen this behavior before? I'm considering trying to just bend the saw blade a tiny bit towards the main blade, that should stop it from snagging, but I figured I'd check with the gurus first. :D
I'll try to get some pictures up if needed when I get home from work tonight.
I have the same thing with a ONE HAND MASTER RT and i went back to the store in the same day.

They replaced it with a new one in a few minutes, no questions asked. :DIf I'd have bought it in a physical store I'd have done just that. :)
I'm happy with it now though, it works like a charm.
I.. can't stop opening and closing it now.. It's my first OHO Vic.. and it's fun! :D
-
@Northern Geek said:
I fixed the saw by just holding on to the handle and pressing the saw blade towards the edge of a table.. now it closes perfeclty
Anyone know the point of the small bumps on the liner by the main blade btw? The two "speed bumps" that you notice when opening them.
Good for you ;).
I tried that with the Vic knife from my son but it didn't solve the problem, no mather how far I tried bending the saw the other way, it always got stuck on the scale again ...
@T.J. Hooker said:
I heard of Victorinox service being excellent.
Was the store a Vic store or a other store?It was an official Vic dealer, along with 2 other "outdoor stores", they all told me the same, Vic products are great, but the Belgian importer doesn't care about the stores or their customers. When three different stores tell you the same story, I fear there must be some truth in it. One of them even sold me all of the Spirits he had in stock at -70% , just because he wanted to get rid of them because he didn't want to deal with the Vic importer anymore.
I called the customer service myself a few times (one time even 45 minutes) and heard on lie after the other.
-
If the importer doesn't respect the customers then the after sales support ceases to exist.

You can contact directly Victorinox in Switzerland, they have different attitude to the customers. -
Just thought I'd share a pic of the newcomer with the rest of the family. :)
As you can probably see it's a SwissTool, Compact, Climber, the odd Deluxe Climber, Handyman and the new Forester.
Shot with an iPhone so sorry about the fuzzyness and so on. :P

-
@Northern Geek said:
Just thought I'd share a pic of the newcomer with the rest of the family. :)As you can probably see it's a SwissTool, Compact, Climber, the odd Deluxe Climber, Handyman and the new Forester.
Shot with an iPhone so sorry about the fuzzyness and so on. :P
You have a nice collection there. :)
-
Cheers mate :)
I'm really trying to stick to ones I think I'd actually carry.. but.. there will probably be a few that I just can't avoid in the future.
For instance the Forester made me curious about a OH Nomad as well.. For more urban focus than the Forester.
-
I still blame you lot for it all!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
