Best non mainstream MT?
-
Manufacturer or brand?
Bahco tend to be decent and widespread in DIY stores but they do not make (all) their own multitools...Ganzo seems to make many tools, some ok some not, so even though their line is small they seem pretty big manufacturing wise.
SOG small enough?
-
I actually like the Cabela's multi with light very well.

Sent from Ash forum mobile
-
I've seen Bahco's and they do look good :)
Not seen the other suggestions though

-
@Mike, Lord of the Spammers! said:
Not seen the other suggestions though
You must have seen SOGs :D
Here is a discussion about Ganzos:
/post/604560and some 1st looks at them
/post/498478
/post/446417
(that was I think my 1st ever post, and you replied in the thread; short memory, right?
)If you look at them in Exduct you will recognise them as products being sold with many different names on them: http://www.exduct.com/ganzo-multi-tools-online-wholesale-store.html
-
After almost 40,000 posts everything gets a little hazy :-[ :D
-
i would like to try this one out

http://www.exduct.com/Chinese-Folding-Knives/Ganzo-Knives/G201B-Ganzo-Multi-Tool.html
-
Non-mainstream ...

Well most of the SAK's I carry are ones that have been discontinued as the manufacturer thought they were no longer marketable. Many of my other carried MT's are discontinued too such as Core, MP700, Bear Jaws (Mini, Standard and Super), Mini, KF4 etc etc. Some of my MTs have been modded which I suppose takes them out of mainstream too.
As regards tools which are a non-mainstream manufacturer or brand ... I have a Bahco branded one with corkscrew (manufacturer unknown), but aside from that most I've tried that has been off-brand has either failed me or just not been suitable for my needs. The little Sheffield branded keyring tool, the IDL T5 and T7, the Screwzall are all usable but limited.
I think True Utility has come up with some nice little items, but not necessarily multis. Twistick, Telepen, Eyeglass, Slimclips are all decent offerings from them. I have limited exposure to their multitools though
I'm not sure there's any particular one th ..... WOAH! Got one!
Swisstech Utilikey!!! That's the one that get's my vote

-
Good question Mr.LOTS

I don't know... I don't have or use any!
-
Me neither, but then maybe that should be addressed as there could be some fine tools to be had

-
Too bad Lynn has connectivity problems, I think she would have great input here.
-
@Zed said:
i would like to try this one out
http://www.exduct.com/Chinese-Folding-Knives/Ganzo-Knives/G201B-Ganzo-Multi-Tool.html
I really like this one. Would love to mess around with one to see how it performs. Although I do not like the butterfly shape of the closed tool, all those outside accesible tools are pretty sweet.
-
@50ft-trad said:
Non-mainstream ...
Well most of the SAK's I carry are ones that have been discontinued as the manufacturer thought they were no longer marketable. Many of my other carried MT's are discontinued too such as Core, MP700, Bear Jaws (Mini, Standard and Super), Mini, KF4 etc etc. Some of my MTs have been modded which I suppose takes them out of mainstream too.
As regards tools which are a non-mainstream manufacturer or brand ... I have a Bahco branded one with corkscrew (manufacturer unknown), but aside from that most I've tried that has been off-brand has either failed me or just not been suitable for my needs. The little Sheffield branded keyring tool, the IDL T5 and T7, the Screwzall are all usable but limited.
I think True Utility has come up with some nice little items, but not necessarily multis. Twistick, Telepen, Eyeglass, Slimclips are all decent offerings from them. I have limited exposure to their multitools though
I'm not sure there's any particular one th ..... WOAH! Got one!
Swisstech Utilikey!!! That's the one that get's my vote

Just as a head's up, the Mini Bear Jaws is still made, however the non-locking Bear Jaws and Super Bear Jaws aren't - only their locking counterparts are now. :/
-
@50ft-trad said:
Non-mainstream ...

Well most of the SAK's I carry are ones that have been discontinued as the manufacturer thought they were no longer marketable. Many of my other carried MT's are discontinued too such as Core, MP700, Bear Jaws (Mini, Standard and Super), Mini, KF4 etc etc. Some of my MTs have been modded which I suppose takes them out of mainstream too.
As regards tools which are a non-mainstream manufacturer or brand ... I have a Bahco branded one with corkscrew (manufacturer unknown), but aside from that most I've tried that has been off-brand has either failed me or just not been suitable for my needs. The little Sheffield branded keyring tool, the IDL T5 and T7, the Screwzall are all usable but limited.
I think True Utility has come up with some nice little items, but not necessarily multis. Twistick, Telepen, Eyeglass, Slimclips are all decent offerings from them. I have limited exposure to their multitools though
I'm not sure there's any particular one th ..... WOAH! Got one!
Swisstech Utilikey!!! That's the one that get's my vote

Just as a head's up, the Mini Bear Jaws is still made, however the non-locking Bear Jaws and Super Bear Jaws aren't - only their locking counterparts are now. :/
Yeah, I actually knew that ::) brain fart on my part

Thanks for the correction
-
@50ft-trad said:
@50ft-trad said:
Non-mainstream ...

Well most of the SAK's I carry are ones that have been discontinued as the manufacturer thought they were no longer marketable. Many of my other carried MT's are discontinued too such as Core, MP700, Bear Jaws (Mini, Standard and Super), Mini, KF4 etc etc. Some of my MTs have been modded which I suppose takes them out of mainstream too.
As regards tools which are a non-mainstream manufacturer or brand ... I have a Bahco branded one with corkscrew (manufacturer unknown), but aside from that most I've tried that has been off-brand has either failed me or just not been suitable for my needs. The little Sheffield branded keyring tool, the IDL T5 and T7, the Screwzall are all usable but limited.
I think True Utility has come up with some nice little items, but not necessarily multis. Twistick, Telepen, Eyeglass, Slimclips are all decent offerings from them. I have limited exposure to their multitools though
I'm not sure there's any particular one th ..... WOAH! Got one!
Swisstech Utilikey!!! That's the one that get's my vote

Just as a head's up, the Mini Bear Jaws is still made, however the non-locking Bear Jaws and Super Bear Jaws aren't - only their locking counterparts are now. :/
Yeah, I actually knew that ::) brain fart on my part

Thanks for the correction
No worries, just thought you'd want to know so you could get some spares.

-
I have to second the vote on the utilikey. I've carried one every fay for 8 years. It sees nearly daily use and is still good as new!

-
Just thought of one people have talking about recently - that Rough Rider with pliers.
Apparently it's rather good for the money :)
-
Great topic!
I vote multitasker.
-
What about the Raker Ring Tool? Does that count? I'd be hard pressed to think of a non mainstream tool that is in more MTO member hands than that one.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





