Help! Problems with a Surge.
-
I recently tried a practice at taking apart my Leatherman Surge. Sadly i ended up stripping one of the screws and it just went down hill from there. I attempted to cut a slot in the screw with a dremel to fit a flathead into the screw but i ended up wrecking the pin and handle end piece. The handle is marred up a bit and whats left of the pin is stuck but i think i can make it work. Any advice for a novice who really screwed up?
-
Pics will help us decide what you need to do. But it sounds like you will need a new pivot.
-
Here is the link to the pictures, i included all the parts i need to replace on the side, there is also a bit of damage to the release button but i don't think it will be a problem.
-
From the pics it looks like that you indeed need a new pivot. I would try here:http://www.knifekits.com or do a search for knife maker supplies. Sending it back to leatherman at this point will cost you as you have already took it apart
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login