Peening question ...
-
I tried doing a search but couldn't find the answer to something I'd been chewing over ...
If building a SAK that's destined for wood scales is it really necessary to peen to bushings or can the pins be peened direct to the liners? I appreciate that the liners are soft so a rouge smack with a hammer might smurf things up a bit, but aside from that I can't see any reason for using/reclaiming the bushings other than giving the celidor scales something to clip to
Am I missing something?
-
i have peened 1 or 2 knives directly to the liners, and no problems, you have to left a little bit more pin so the new scales have something to grab to

-
Ah, OK - that makes sense

Thanks for the help
-
So Al, what you working on?
:D -
@sparky415 said:
Al, Obviously Sidharth's advice is from the master
If I was doing it I would try putting a washer over the pin to spread the load a little as the liners are very thin

I don't have any delusions whatsoever that I'll get anywhere near the calibre of Sidhartha's work

well ..... I have plans for a 84, an 85, and a 91. I've not seen anyone else try what I'm planning with the 84 yet, but part of it might be a little more tricky than I can be bothered with. The 85 keeps changing direction frequently but then coming back to the base idea, and the 91 ... well that changes every time I pick the bloody donor knives up ::)
Don't get too excited though - the chances of any of it leaving the head and trickling down to the fingers anytime soon is pretty slim
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login