bit kit mp400
-
Sorry I dont have a picture of the bit holder in action,but the LM bit holder for the Kick/Fuse/Blast works far better.It sits snug on the philips driver,where as the Gerber one slides onto one of the flat drivers,and is held in place by a magnet,and has a silly amount of lateral play.Hope this helps
-
Hi Colt 1911, Kirk13 is right, the Leatherman bit adaptor is much better, solid and more sturdy in use, here's some pics

Gerber MP400, LM Fuse and Mr pinchy square phillips.

Gerber MP400.

LM Fuse.

Mr Pinchy.

LM bit adaptor.

Hope this helps
-
Would I be correct in assuming that the LM bit adapter fits the Octane as well?
-
Thank you so much, that really helps
-
Dont know bout the Octane,but it fits Mr Pinchy :D
Worryingly,it fits Gerbers much better than LMs

-
FWIW there used to be an "old" Gerber adapter that worked with the 3d phillips. I know because I have one, and yes it also works on other 3d phillips designs. That said, you're probably better of grabbing one of those LM adapters, as they're more readily available and thus easier to source.

-
The Gerber kit is still easy to find on ebay and amazon among other places. Fits on the phillips and works very well.

-
-
Would I be correct in assuming that the LM bit adapter fits the Octane as well?
Not so sure about that actually. I don't have a LM adaptor to try, but my Octane Phillips driver is rectangular rather than square in cross section and so my CRKT bit adaptor won't go on it. :-\
Just saw this thread (it's been a long, cold, dark week... >:( ) and it looks like nobody has put the adapter to the test on the Octane. I just tried it, and it does not work. :( It does, however, fit the Strata just fine.


-
Would I be correct in assuming that the LM bit adapter fits the Octane as well?
Not so sure about that actually. I don't have a LM adaptor to try, but my Octane Phillips driver is rectangular rather than square in cross section and so my CRKT bit adaptor won't go on it. :-\
Just saw this thread (it's been a long, cold, dark week... >:( ) and it looks like nobody has put the adapter to the test on the Octane. I just tried it, and it does not work. :( It does, however, fit the Strata just fine.


Thanks for that
now we know 
-
Would I be correct in assuming that the LM bit adapter fits the Octane as well?
Not so sure about that actually. I don't have a LM adaptor to try, but my Octane Phillips driver is rectangular rather than square in cross section and so my CRKT bit adaptor won't go on it. :-\
Just saw this thread (it's been a long, cold, dark week... >:( ) and it looks like nobody has put the adapter to the test on the Octane. I just tried it, and it does not work. :( It does, however, fit the Strata just fine.


Thanks for that
now we know 
Thanks for testing the LM adapter out for us. Do one of the Gerber bit adapter/kits fit the Octane?
-
I took a look on Gerber's website last night, and none of their bit adapters list the Octane as one of the tools. :(
-
Thanks guys for taking the time to try this i should have the legend by next week so look forward to seeing what i can mod for it

-
@jerseydevil said:
I took a look on Gerber's website last night, and none of their bit adapters list the Octane as one of the tools. :(Thanks JDevil. I still intend to get an Octane, eventually.
-
I took a look on Gerber's website last night, and none of their bit adapters list the Octane as one of the tools. :(
Thanks JDevil. I still intend to get an Octane, eventually.
Go for it! The Octane is a favorite of mine. It has a number of fans here.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login