Do you use protection?
-
When you have a knife that you are in the process of modding, do you have some method of covering the blade so that you keep your blood on the inside?
I mean there are so many opportunities to slice yourself in breaking down a knife, having loose blades floating around your workspace, modding and rebuilding.With most of the old used knives I have been playing around with up intil now, the blades have been user sharpened so I just let the polishing mop dull the edge when I'm giving the tools an initial polish before breaking down.
This eventually looks better as after a detail polish and rebuilding I regsharpen the cutting edge and it shows nice and even against the polished blade.BUT, new SAK blades are so sharp you can cut yourself and only realise when you wonder why there is blood on your finger.
So, other than just being extra careful, What do people do?I have been thinking of Aluminium "400mph tape" over the cutting edge but only about halfway to the spine of the blade so it doesn't interfere with the operation of the blade for building and fitting. This would be easy enough to remove when no longer needed, but is pretty tough.
Or do I just need to stir a spoonful of cement into my coffee and "harden the F*** up"
-
I cut myself so often working on knives that I made a rule of always wearing gloves now. I find the mechanics style gloves are strong enough to block blades, but dextrous enough to allow movement.

I enforced the rule after one time I was drilling a blade pivot, and just holding the blade with bare hands. The drill bit caught in the hole and spun the blade at full force into my thumb, cleaving part of the nail off and blood everywhere. So for me a work glove policy is the only answer. :D
-
Ah the old Bit Spin the Piece at The End of the Hole trick. A mangling surprise the first time or two - or three.

-
"If I sound a bit cavalier here, it is because one must laugh in order not to cry."
The SAK Owner's Manual -
I don't wear gloves but I put on protective glasses when dealing with 58mm models.
The first one I opened completely exploded sending the blade right between my eyes. This could have gone extremely bad.Some everyone, please protect yourself and ask before doing something stupid.

-
I don't, but I should.



-
I have kevlar gloves but I allways forget to wear them when I am sharpening knives...
I do, however, wear "gardening" gloves and eye protection when needed.
-
+1 on eye protection. A metal shard in the eye isn't fun. :ahhh
-
@PTRSAK said:
I have been thinking of Aluminium "400mph tape" over the cutting edge but only about halfway to the spine of the blade so it doesn't interfere with the operation of the blade for building and fitting. This would be easy enough to remove when no longer needed, but is pretty tough.I'm not a modder, but... The tape doesn't need to be strong, it just needs to interfere with the sharp edge. I'd use any thin tape that's easy to remove from the blade. Some kind of masking tape, perhaps? That might be a tad thick, though... (I see people building handles on fixed blades often use masking tape.)
-
Oh eye protection is key too, I use a full face shield since i got tired of being hit in the face with metal debris. Works better than goggles for me since it doesn't interfere with glasses.

-
just store the separate blades to avoid edge damage, eye protection while sanding or using power tools, but nothing but my bare hands while working, i don´t remember the last time i cut myself ;), your hands will get used to it, and of course you need to know how to grab the blades :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


