Designing a nautical multi tool
-
Most multi tools are aimed at either the workplace or landbased outdoor life.So let's suppose that you're going to design a multi tool aimed at waterborne pursuits,what features and functions would you build into it?
-
For some reason I find this particularly interesting ::)
I'll have to give this some thought.
-GM
-
Watersports is Vague - afterall, there is more water around than there is land, so shouldn't we be given more options?
What Dunc and his Rubber Duckie want is likely very different to what Def wants with his canoe, which is different again to someone with a Sailing boat, and again to a Diver.
In the Blame it On Bob thread, Bob hissownself shows a Wichard Multi.
Wichard don't make a "traditional" plier based multi, but it's somewhere to start.
The oldassalt Yachtsman knife, based off the British Army Knife is another indication of what might exist on a Marine Multi.
We also have the Wenger Alinghi and Vic Mariner/Skipper for cues.
-
I think some basic cues would be a substantial lanyard ring, bright coloration (powdercoat maybe?), some texturing for grip and a one handed opening blade- although two would be preferable- a serrated and plain. The blades should also be sheeps foot blades- if I need to repel boarders, I'll use my cutlass.
There are a few things that are mandatory for boaters in this area- whistle and flashlight being on the list, and while those could be added to a tool, I think I would prefer to have them separate.
The only other thing I could see being helpful, for me anyway, would be a clip so I could attach it to the straps on my pfd. Other than that kind of stiff though, I think the regular woods type tools would suit me since I tend to appreciate the outdoors aspect of boat trips as much as anything else. I go boating and camping. If I had a sailboat or power boat I might think differently.
Def
-
Also good corrosion/water/salt water resistance would be a must.
-
Yup- I'd have to agree with that. Even freshwater can cause problems if not properly dried.
Def
-
I very high degree of corosion resistance would be mandatory, as would Oho tool's that could be opened either with cold wet fingers or gloves, a non slip handle material, maybe neoprene, and maybe some way of making the tool float (a sealed air compartment ???) :)
-
I don't think a sealed compartment would help much- but a substantial ring that could be tied to a float might not be a bad idea. Even if the tool is too heavy for the float, it could slow it's sink rate down enough that the tool could be recovered before it's too late, or make it easier to spot in relatively shallow water.
Def
-
@Defender said:
I don't think a sealed compartment would help much- but a substantial ring that could be tied to a float might not be a bad idea. Even if the tool is too heavy for the float, it could slow it's sink rate down enough that the tool could be recovered before it's too late, or make it easier to spot in relatively shallow water.Def
What would be the best colour to be seen below the surface ???
-
Bright yellow would be the best, and orange would be next in line.
Most everything on the bottom is going to be a murky brown unless you are in the Caribbean or something.
Def
-
I think some basic cues would be a substantial lanyard ring, bright coloration (powdercoat maybe?), some texturing for grip and a one handed opening blade- although two would be preferable- a serrated and plain. The blades should also be sheeps foot blades- if I need to repel boarders, I'll use my cutlass.
Despite my preference for stainless handles, I suppose we are in agreement thus far
There are a few things that are mandatory for boaters in this area- whistle and flashlight being on the list, and while those could be added to a tool, I think I would prefer to have them separate.
Aye, though I'm not sure I've ever used a whistle in anger...
Getting a tool to float is a bit of a dream, a good lanyard clip is best there.
Emergency Orange is always a good colour - A local boatie has a 540 with the entire hull in High-Vis Orange. I imagine it's very handy if he ever capsizes. (Most antifoul is black or blue, not a great choice if you expect to be upsidedown)
I was going to suggest a shackle key, but the Pliers would probably deal with any of those issues.
If you expect ropework - a Marlingspike
Your usual collection of Files, Saws and assorted Drivers is as necessary on Boats as it is on Land...
Mmm yes, I don't the design of a Nautical Multitool really depends on the tools and their functions, but on the accessibility of it all - Bright Colour, Non-Slip, and One (Cold and wet, or Gloved) hand opening.
-
Heres my list of wants ....
One hand opening blade with blunt tip and mild serrations ( Like Vics )
Large lanyard
Large pliers
shackle wrench
Bright colourYou guys have already suggested most of these :D
Dunc
-
It's too bad that Buck does not make the Tiburon anymore.Pair that with a Leatherman or a Vic and most needs would be met.I keep my Tiburon in my tool bag at work for more Land Based problem solving in the truck.
Dtrain
-
-
The things I'd find essential would be:
High corrosion resistance
a non-slip textured surface
high-visibilty
an attachment point large enough to be useful
marlinspike
shackle wrench
ergonomics
sheepsfoot blade
pliers
and the various screwdriver blades
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




