Slim single AA flashlight?
-
@50ft-trad said:
Thrunite Ti is simple with long runtime on low, but with optional higher mode ... it's a twistie and partially tighening will get you low and full tightening leads to full power ... simple, cheap, and two easily selectable modes for power OR runtimeNitecore T0 is a similar body but single mode - 12 lumens for 21 hours
Gerber Tempo similar state of affairs I thinkFor tight beam consider the LED Lenser P2 ... you'd need to check light levels and runtimes, but be aware I think their runtimes listed are to zero output or something equally unhelpful
Being a complete pudding, it took me a couple of hours and a rather strong rum cocktail (white rum, golden rum, dark rum, cherry brandy liqueur, and cola) to realise I'd recommended several triple A lights instead of double A

All my previous recomendations are still worth looking at, but back on track ... :D
How critical is size, and how critical is runtime? The Gerber Omnivore will run for ages, and will run on AAA, AA or CR123A, it will also run on batteries that other torches have given up on (the best "scavenger" torch I've found for all three battery types) ... the downsize is the beam pattern is very primative, and it's HUGE!!!
-
Size is very important, runtime is nice, but not extremely important. (Though if it's a battery hog, I want a low-light battery vampire fallback mode.)
Right now I really like the look of Zebralight SC51c and the EagleTac D25A.
Edit: Even though none of those are as simply as I wished for. Seems one can either get nice or simple? I like the UI of the EagleTac better though, not a big fan of the Zebralight UI. Too smart for me. :)
-
Since you prefer spotty to flood I'd have to recommend you stay away from the zebra. An old SF E1B is spotty, a bit big and CR123A cell, so an EagleTac or even some of the Fenix lights might be better for you.
Lumipower use to make some lights with deep reflectors, but most of the smaller pocket ones are going to be more flood. Look for a light using an XR-E led as they will tend to throw more even if you give up some lumes.
I'd recommend you visit CPF and check out some beamshots.
-
Are you thinking tail switch or a twist head? One light that comes to mind is the Fenix E11, simple, slim, tail switch etc. I've not got one myself but it does have it's fans and detractors.
If you want much smaller then a twist on style is likely the way to go. Lots of options there but will tend towards a flood beam rather than a spot.
-
Another (slightly odd) suggestion comes to mind; the Icon Modus 1. Very different from the majority of lights out there. Not the brightest but definitely different. :) Again, I don't own one so don't blame me if it's rubbish. ;)
-
@Steinar said:
Size is very important, runtime is nice, but not extremely important. (Though if it's a battery hog, I want a low-light battery vampire fallback mode.)Right now I really like the look of Zebralight SC51c and the EagleTac D25A.
Edit: Even though none of those are as simply as I wished for. Seems one can either get nice or simple? I like the UI of the EagleTac better though, not a big fan of the Zebralight UI. Too smart for me. :)
Zebralight's UI is a LOT easier in practice than it is on paper. I think you'd get used to it pretty quickly.
For your budget, I'd definitely suggest a ZL; I think they're the best EDC/pocket lights on the market today. No one has the combination of output and run times that ZL is producing right now. They're also very high quality torches; the fit and finish on all of the ones I've got and have had has been excellent.
I'll also second the suggestion for an SC52. I've got one at the top of my list for when they come out with a neutral tint or HCRI version.
-
The way people talk about ZL reminds me a lot of how we always end up telling newbies in the tool subforums to get a Victorinox Spirit. So, as I do have a Vic Spirit, I'm ordering an SC52 as I'm writing this. :)
Thanks for the help, everybody!

-
I'm still trying to get "in-tune" with my ZL. Initially i was far from convinced, but I've decided to give it some time and see if it wins me over :)
-
@50ft-trad said:
I'm still trying to get "in-tune" with my ZL. Initially i was far from convinced, but I've decided to give it some time and see if it wins me over :)I think they do take a little more getting used to than other lights with more 'traditional' UI's, because unlike most lights, you don't just 'click-through' to get to the mode you want.
Probably the most challenging thing about them is learning how long to hold the button to get it to come on in low vs. high. Other than that, best one button UI of any light I've ever had.
-
Foursevens Mini MA
Fenix LD15
Olight I2
Thrunite T10All small, simple durable lights. The I2 and T10 are half, or less, the cost of the ZL, Peak, and EagleTac.
-
@ICanFixThat said:
but most of the smaller pocket ones are going to be more flood.Au contraire, mon frere.
Right now I'm >thisclose< to pulling the trigger on a new Thrunite Archer 1A, it's basically their excellent Neutron 1A light with a forward clicky switch and the latest Cree XP-G2 emitter, which provides abotu 25% more throw than the XP-G (which already throws better than the newer large-die XM-L, which throws fah smurfe without a ginormous reflector). So if you want slim, well-made, simple and throwy, take a gander at the Archer 1A.
-
Throw vs flood in a torches beam is a function of three things: 1) emitter die size; larger die emitters will be floodier than smaller die sizes; the XML is floodier than the XPG which is floodier than an XPE, etc. 2) Reflector diameter; in general, a larger reflector diameter will give more throw as it catches more light given off by the reflector to redirect forward. 3) Reflector depth; not a lot of people realize this, but one of the throwiest lights I have is my old Jet-3 Pro ST which has a reflector that's about 1" deep, though it's only about 3/4" wide. I actually think a deep reflector is better for producing throw than a wide one, but I'm just speculating about that.
-
As said by the previous knowledgeable posters the LED size and the depth and width of the reflector will affect throw.
If you want something small and slim then the reflector will have to be small, thus you will get more flood.
A zooming torch gives you both but these type of torches (i.e. Sipik 68) are not that small.
The Romisen Rc-G2 throws nicely, but again its head is much bigger than the rest of its body, though it is still small.
Both of the above are cheap to buy.You have a high budget so look around and take your time.
-
@50ft-trad said:
I'm still trying to get "in-tune" with my ZL. Initially i was far from convinced, but I've decided to give it some time and see if it wins me over :)Al, give yourself some time with it; you'll get used to it. It really is a different way of thinking than how most regular torches work. After a while it'll get easier, you just have to play around with it a bit.
Here's a quick heuristic that while hopefully be a help...
From off:
- a "quick click" turns it on in high. It should have memorized which of the two sub-levels you had it in last.
- a "slow click" turns it on in low. Same as above for the sub-level.
- a "quick double-click" will flash you briefly through high and go to medium.
While on:
4) a quick double-click switches between the two sub-levels of the mode you're currently in.
5) a click and hold cycles through low, medium, and high; starting at low regardless of whatever mode you were currently in; release when at the desired mode.
6) single quick click to turn off. -
I will stick it out for a bit, but ...
That guide you just did for me ... torches shouldn't need that ... should they?
It kinda reminds me of the old finishing moves for Mortal Kombat on the Sega Megadrive. You'd tap buttons like crazy, get something slightly wrong, your character would lift one leg slightly as if he was gonna drop a cloudy one, then your opponent would just wobble and fall over. A few rounds of that and you'd got blisters on your fingers but still not ripped their sodding skeleton out ::)
-
I have a simpler guide for non-flashaholics when I hand them a Zebralight:
"Press and hold, release the button when you get the level of illumination you want. If it is close, but not quite right, try a quick double click."
-
@Steinar said:
The way people talk about ZL reminds me a lot of how we always end up telling newbies in the tool subforums to get a Victorinox Spirit. So, as I do have a Vic Spirit, I'm ordering an SC52 as I'm writing this. :)Thanks for the help, everybody!

Well I've got quite a few Zebralights, their headlamps convinced be quite a while ago what a great tool they were and I really like the thought that goes into their design. These small batch lights can have assembly issues, but even Surefire lights have had serious issues, with them it's just easier to get them fixed. Generally I've been more than happy, but buying from a local dealer makes returning a dud so much easier.
The SC52 I must say is a REALLY fine light. I usually go for Neutral tint these days (that means ZL w series), but my standard SC52 does have a 'really' nice tint. I'm running mine on a Eneloop NiMH rechargable because it is not my main EDC light, and the eneloop works very well. This light might convince me to buy a couple 14500 Li-Ion cells just to see what it can do. If it was my main EDC I'm not sure really what power source I would run it on.
-
Maratec offers a good AA in black and natural aluminum and solid copper. Twist on low the more you twist the brighter it gets, I like a twisty for pocket carry I have actuated too many push buttons in my pocet.
-
I know VERY little about torches/flash lights, but I have had a few types over my MANY years of being a 'gadget junkie' and found the LED lenser P3 ticks most of the boxes for me !
just my two cents worth, so play nicely and Pleeeease don't get me into flashlights ::) I am easily led
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login