Slim single AA flashlight?
-
As said by the previous knowledgeable posters the LED size and the depth and width of the reflector will affect throw.
If you want something small and slim then the reflector will have to be small, thus you will get more flood.
A zooming torch gives you both but these type of torches (i.e. Sipik 68) are not that small.
The Romisen Rc-G2 throws nicely, but again its head is much bigger than the rest of its body, though it is still small.
Both of the above are cheap to buy.You have a high budget so look around and take your time.
-
@50ft-trad said:
I'm still trying to get "in-tune" with my ZL. Initially i was far from convinced, but I've decided to give it some time and see if it wins me over :)Al, give yourself some time with it; you'll get used to it. It really is a different way of thinking than how most regular torches work. After a while it'll get easier, you just have to play around with it a bit.
Here's a quick heuristic that while hopefully be a help...
From off:
- a "quick click" turns it on in high. It should have memorized which of the two sub-levels you had it in last.
- a "slow click" turns it on in low. Same as above for the sub-level.
- a "quick double-click" will flash you briefly through high and go to medium.
While on:
4) a quick double-click switches between the two sub-levels of the mode you're currently in.
5) a click and hold cycles through low, medium, and high; starting at low regardless of whatever mode you were currently in; release when at the desired mode.
6) single quick click to turn off. -
I will stick it out for a bit, but ...
That guide you just did for me ... torches shouldn't need that ... should they?
It kinda reminds me of the old finishing moves for Mortal Kombat on the Sega Megadrive. You'd tap buttons like crazy, get something slightly wrong, your character would lift one leg slightly as if he was gonna drop a cloudy one, then your opponent would just wobble and fall over. A few rounds of that and you'd got blisters on your fingers but still not ripped their sodding skeleton out ::)
-
I have a simpler guide for non-flashaholics when I hand them a Zebralight:
"Press and hold, release the button when you get the level of illumination you want. If it is close, but not quite right, try a quick double click."
-
@Steinar said:
The way people talk about ZL reminds me a lot of how we always end up telling newbies in the tool subforums to get a Victorinox Spirit. So, as I do have a Vic Spirit, I'm ordering an SC52 as I'm writing this. :)Thanks for the help, everybody!

Well I've got quite a few Zebralights, their headlamps convinced be quite a while ago what a great tool they were and I really like the thought that goes into their design. These small batch lights can have assembly issues, but even Surefire lights have had serious issues, with them it's just easier to get them fixed. Generally I've been more than happy, but buying from a local dealer makes returning a dud so much easier.
The SC52 I must say is a REALLY fine light. I usually go for Neutral tint these days (that means ZL w series), but my standard SC52 does have a 'really' nice tint. I'm running mine on a Eneloop NiMH rechargable because it is not my main EDC light, and the eneloop works very well. This light might convince me to buy a couple 14500 Li-Ion cells just to see what it can do. If it was my main EDC I'm not sure really what power source I would run it on.
-
Maratec offers a good AA in black and natural aluminum and solid copper. Twist on low the more you twist the brighter it gets, I like a twisty for pocket carry I have actuated too many push buttons in my pocet.
-
I know VERY little about torches/flash lights, but I have had a few types over my MANY years of being a 'gadget junkie' and found the LED lenser P3 ticks most of the boxes for me !
just my two cents worth, so play nicely and Pleeeease don't get me into flashlights ::) I am easily led
-
@50ft-trad said:
I will stick it out for a bit, but ...That guide you just did for me ... torches shouldn't need that ... should they?
It kinda reminds me of the old finishing moves for Mortal Kombat on the Sega Megadrive. You'd tap buttons like crazy, get something slightly wrong, your character would lift one leg slightly as if he was gonna drop a cloudy one, then your opponent would just wobble and fall over. A few rounds of that and you'd got blisters on your fingers but still not ripped their sodding skeleton out ::)
It's the price for having a UI that allows you to access either low or high from off. That's why I say it's a different mindset. The UI of most torches produces what I call the "Quark Shuffle", which is having to repeatedly half-click through all the modes in sequence, even the disco modes.
I cut my flashaholic teeth on Quarks, but their UI has really begun to wear on me, and the only FourSevens torch I have now that I bother to EDC anymore is my HCRI Preon, which I use with a one cell body and a clicky switch. The disco modes are hidden, you have to go through a particular click sequence to get to them, and it only has three main modes; low, medium, and high. I've gotten sick of all the clicking and combined bezel turning involved with all the other Quarks. The main reason they're still my second most used lights after my Zebras is their Lego-ability, so I can mix and match heads, tailcaps, and body tubes and make just about anything I want with them.
I've had a few Jetbeams too, only one left now though, my old Jet-III Pro ST, which has their "IBS" fully programmable UI. Only three modes, but you can program each of them to be anything you want. Main problem with it is that it's too easy to accidentally go into the programming mode.

I've had some NiteCores, too, and they were nice for the most part. I ended up gifting away all of the ones I had though. My old EZ-AAw belongs to my son now, and it's still going strong. I just don't care for twisty interfaces that much; although they do have some advantages for durability by not relying on a switch.
I've also had a few Fenixes, and their interfaces make the Quarks look like a walk in the park... twist, then click, then double twist, or double-click then double-twist then click... yada yada yada.
Needless to say, I no longer have any of them, either.If it was just the UI that was an advantage of a Zebra for me, I probably wouldn't be as big on them as I am. But, my experience with them has been very good in terms of their build quality, and particularly in terms of their consistency in their emitter tints. I won't actually buy a Quark anymore unless I have some guarantee of what the tint is going to be, such as if it's a warm HCRI XPG emitter. In the past, their tints, even with their neutral emitters, have been all over the map, and I've been extremely disappointed in the amount of variation in their tints.
Zebralight is very picky about their tints, and their CS dept. has told me in email responses to questions I've asked them that they often have to wait to get emitters that are just the tint they want, which is why it takes them longer sometimes to get a particular "w" model to market; when Zebra says their emitters are going to be 4,200K, or 4,500K, I've learned I can trust them. Add the side clicky design, and the single button UI that doesn't require me to do the Quark Shuffle, or deal with any bezel-twist jive, and I'm in heaven. They're just fantastic little lights, and they're pretty much perfect for me.
I guess that's why I already have five or six of them, and have a couple more on my wish list as well. I'm waiting for a W or C version of the SC52, and am looking forward to a new 3xAA model they've got up on their comparison list as well. Now I just need to figure out if I should get a new Solarforce host for another Nailbender P60 module I want first, or wait for the SC52w, or get the Spark ST6-460nw headlamp I've been wanting, or perhaps the new Spark SX5-320nw headlamp they just came out with...

Okay, I'll shut up now! :D In short, give yourself some time, be patient with the light, and you will eventually get used to it. Once you do, you'll wonder how you ever got along with a torch with a Quark Shuffle UI in the first place!
-
Makes me want to buy one of them fancy programmable torches to see what is all about.
-
@dks said:
Makes me want to buy one of them fancy programmable torches to see what is all about.They are a bit thin on the ground, and as Heinz says "Main problem with it is that it's too easy to accidentally go into the programming mode." Unless I use a light a lot I can never remember how to get out of programming mode. let alone how to program it properly (yes, I do have way too many lights).
So these days I usually end up EDCing Zebralights, Photon Freedom Micros or SafeLights (the 9V ones), I can (usually) remember how to use them.
-
Makes me want to buy one of them fancy programmable torches to see what is all about.
They are a bit thin on the ground, and as Heinz says "Main problem with it is that it's too easy to accidentally go into the programming mode." Unless I use a light a lot I can never remember how to get out of programming mode. let alone how to program it properly (yes, I do have way too many lights).
So these days I usually end up EDCing Zebralights, Photon Freedom Micros or SafeLights (the 9V ones), I can (usually) remember how to use them.
Yeah, one reason I trimmed my stable down over the last year or so is because I got tired of forgetting which light I was using and ending up messing something up in the programming because I forgot I was using a Jetbeam instead of a Quark, and messed up the IBS settings and all that...
I guess I'm not a true flashaholic since I don't buy every new and fancy torch that comes out anymore, but I'm not a collector, and it bugs me to no end when I can't find one of my lights (or other tools). It's a lot easier on my aging brain to only have to remember one or two different UI's, and the simpler they are, the better.I suppose a light with a mag-ring UI would take all the guess work out of that, but so far I've been happy with my Zebras, Quarks, Sparks, and the odd Jet-beam, Romisen, and SolarForces I have. Honestly, I think I only have about a dozen different lights anymore; maybe 15 or so if I count the Photons and other keychain lights I've got. If I include my old repurposed headlamps; PT's, BD's, and so on, I might hit two dozen total, but my working rotation of lights is only about 10 - 12 anymore, and I am very judicious whenever I buy another light anymore.
-
You want a Fenix E11 IMO
No fancy UI, you just have on and off with twist to select high or low.
I've had an LD01 and two LD10s and love them.

-
I have a Quark Mini AA, and I'm pleased with it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login