opening up a pst
-
I opened up a PST to clean out some dried paint. I simply used 2 other pairs of pliers, one on each side of the tool, to disassemble it.
-
@Lynn LeFey said:
I opened up a PST to clean out some dried paint. I simply used 2 other pairs of pliers, one on each side of the tool, to disassemble it.I used this same trick to try to loosen the serrated blade on a Charge ALX as it was too tight for my liking. It worked well, but I did scratch up the screws a bit.
-
Leatherman uses special maintenance toolsand I have a set of them. Take a look here: Click. :)
Feel free to pm me if there's any questions.. -
It was rumored that the Kick sideclip had a knurled circle and could be used as a wrench. Never had one so cannot say if this is certain.
-
Yes the kick pocket clips work, although fiddly.
-
And don’t forget that gently heating the screws should help loosen the locktight

-
Better to open them up or bathe them in various fluids? I cleaned a few of mine with a combination of CLR and cleaning solvent. Scrubbed them out with a pipe-cleaner and rinsed with hot water. Then I dried it all out with a bit of heat, and applied the lubrication.
-
I use needle nose vice-grips.
-
I think you can use a Pocketwrench to grab hold of them too.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

