Cheap sharpener
-
Sharpening skill level: low
-
Most cheap knife sharpeners will not leave a smooth as a baby sharpness. Some knives can be so sharp you won't know you've cut yourself until you start leaking fluids all over the place.
Cheap sharpened leave a rugged or jagged edge, making them almost serrated in effect. Those, imho, will ruin your knife nothing flat. Might be okay on smurfy knives or for a fast emergency thing, but getting a semi-quality sharpener will save you and your knife and both will last a long time.
Cheap sharpeners also do not last a long time.But... there is one that is of decent quality if you keep using it and don't go pressing hard on it. That's the Pocket Crock Stick. I am a firm believer in ceramic over diamond. Diamond to me is for shaping or taking down metal fast. Like a nail file, or a Leatherman file. But for a nice fine edge a ceramic stone or a whetstone is the best way to go.
For the life of me I have yet to use a whetstone successfully. I'd almost need one of them metal angles that hold the knife on a set angle. Then wet it, and drag it.
Have bought a lot of sharpeners over my 30+ years on this rock, and the Spyderco Tri-Angle SharpMaker was well worth its initial investment of $60 from Amazon. I use it to this day! Only thing it will not sharpen is the cut hook on a Leatherman Charge knife. For that I modified a Pocket Crock Stick sharpener.
-
I would say to you then, challenge yourself and get good at it if you have the time. I knew nothing about sharpening 15 or so years ago. I asked people that I knew were smart about it and they kindly offered their expertise. Now days you can go to YouTube and learn just near anything. I would go that route or ask around, even here, people will be more than willing to help. PM me any time with any questions on this if you'd like.
-
I have the Smith's Pocket Pal sharpener and I like it. It seems sufficient for me, especially since I am not a skilled sharpener. My blades don't get lots of hard use though either, so I don't see the need for any fancier or more expensive sharpening system.
-
Cheapest sharpener available... block of wood + old belt + a sheet of sandpaper. :D
Works great. ;)
-
if it isnt dinged, nicked or bent out of shape, you can just use the bottom of your ceramic coffee mug or bowl. there is usually a rough ring that isnt coated. they are super cheap and easy to find, as cheap as 59 cents.
-
I use the ceramic centre out of a lamp used to light the sports hall where at the school I work in. It's about the thickness of a pencil and about 5 inches long.
One thing I have noticed when sharpening the blade on my Skeletool is that I get a distinct burr that requires a bit more care to remove than on my old and much loved jackknife.
-
I'm a fan of the Spyderco Doublestuff ( a two sided ceramic stone ) , advantage being no shedding of diamond grit , or dishing . The above combined with a small strop , makes a very versatile and compact system . Practice on some cheap but reasonable quality paring knives ( ie: Brazilian made Henkels , or Vic . ) .
Master the basics before going with any more elaborate systems .
Chris
-
@Styerman said:
Master the basics before going with any more elaborate systems .Agreed. Get a basic bench stone first, and start with that. You can get a plain old fine diamond stone from Smiths for about $20. Get a beater knife and start practicing. In the long run, if you put the time and effort into learning how to do it right, it'll pay off. You'll end up knowing a lot more and being able to do a better job than a system can, as long as you're willing to put the time into it.
-
I used to do all my sharpening with a Lansky dog bone sharpener.
6.00
I use a spyderco 701mf now. I get a smoother edge with them.
happy sharpening
-
I am using a Work Sharp Guided Field Sharpener. Works great, has angle guides an all. I have fixed some pretty messed up knives with it.

-
Have seen a few messed up knives. Makes one wonder if they was cutting rock with them.
Sharpened a kid's knife using a Spyderco TASM, took about 30 minutes. Next day he brings me five knives of his dads. My gawd, they didn't even have a shoulder on them. There was no way was I going to try reshaping with a ceramic stone!

That would been the one time I wished had a diamond stone, or a grinder.
-
The cheapest method I know about is sandpaper! I used sandpaper to sharpen a knife with almost no edge (it was so dull it couldn't cut trough paper). In my opinion, knives are fairly easy sharpened on sandpaper - just keep you angle consistent and go from the most abrasive grit needed to the smoothest grit. Once that's done I hone the knife just a little bit on a ribbed steel honer. The results are hair-popping sharp knives

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login