Removing handles from knives...
-
I have an old, rusty kitchen knife which I'm using as a throwing knife. I had problems with removing the rivet "caps" - I couldn't remove them until I used an awl (Vic Rucksack :D) and dug into the handle next to the rivet cap. Example how it looks:

Source: http://forums.egullet.org/topic/25958-basic-knife-skills/Is there a way to remove them without damaging the handles?
-
Have you tried drilling them ?
-
You mean drilling trough the rivet caps and rivets? No, I guess drilling would damage both the caps and rivets. My goal is to disassemble and reassemble the knife handles, rivets and rivet caps unscratched.
-
@IoNForce said:
You mean drilling trough the rivet caps and rivets? No, I guess drilling would damage both the caps and rivets. My goal is to disassemble and reassemble the knife handles, rivets and rivet caps unscratched.I have never managed to disassemble one without ruining <u>both</u> the handle and the rivets
Have you thought of replacing the old handles with wood or micarta?
And can we have some pictures as you progress please
Another kitchen knife handle thread here ;)
</post/587875>
-
Ya you'd have to drill out the rivets, since rivets are meant to not come apart. You should be able to drill them out and save the scales if you're careful.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
