A little advice please.
-
OK, I'm rather taken with the look of the Eagletac D25A clicky, mostly as it has these important features:
Single AA
compact size
pocket clip
tail switch
Multi mode (though I'm still not sure I understand how the D25A UI works :-[)Are there other lights that I should be looking at that would be similar?
-
i don't claim to know about torches (or 'flashlights' , for our colonial cousins) but i love the led lenser P3
tickes most of your boxes i think and only cheep. and the batteries last forever
-
A nice though mate, but I'm really looking for a 1xAA light rather than a 1xAAA right now.
-
I don't have one, but they do look quite nice. I'm not a fan of reverse clicky switches, so that will prevent me getting one.
-
Although I only have the CR123 versions, I really like my Zebralights. I know they recently came out with a AAX1 light with tail and side clickie.
Travis has them I believe.
-
Yes, anything made by ZL is worth a look

Also have a looksee at the Nitecore D11.2 http://www.nitecore.co.uk/nitecore-d11-v2.html
-
Is there a specific mode sequence you prefer? Like low-mid-high or mid-low-high, ... I personally don't like lights that start on high.
-
@enki_ck said:
Is there a specific mode sequence you prefer? Like low-mid-high or mid-low-high, ... I personally don't like lights that start on high.A good question. I'm not a fan of being forced into going through Low mode every time I turn on a light, most of the time I need a torch I'm looking for more than 5 lumen.
With that in mind I like to have one of these UI's; mode memory, physical selector or user programmable levels. Failing that I like a med-low-high sequence, but that's a lesser choice. :)
Can't believe I'd stopped looking at the Zebralights and I'd forgotten about the piston drive Nitecore's. Good suggestions both.

-
Nitecore MT1A.
2 mode light. With the head tightened, the light always comes on in high. With the head slightly loosened, 6 user selectable modes, with memory.

-
Another good looking light Milhouse. Probably a little bulkier than I was thinking TBH, but very nice none-the-less.

-
BTW if ThruNite did a clicky version of my T10 I'd be a very happy man.

-
Is there a specific mode sequence you prefer? Like low-mid-high or mid-low-high, ... I personally don't like lights that start on high.
A good question. I'm not a fan of being forced into going through Low mode every time I turn on a light, most of the time I need a torch I'm looking for more than 5 lumen.
With that in mind I like to have one of these UI's; mode memory, physical selector or user programmable levels. Failing that I like a med-low-high sequence, but that's a lesser choice. :)
Can't believe I'd stopped looking at the Zebralights and I'd forgotten about the piston drive Nitecore's. Good suggestions both.

I think the UI on the D25A is a linear loop; you half click to change modes and it cycles around through the modes. IIRC, cycling through all modes twice in rapid succession takes you to the blinky modes, which you don't normally have to deal with unless you do the rapid two cycle thing to access them.
The Zebra UI is very unique; it will seem odd at first, but give yourself some time and you'll get used to it. It's actually a lot more complicated on paper than it is in use. Simply put, from off, click and hold to cycle through the modes from low in high. From off, a quick click turns the light on in high. From off, a slow click turns the light on in low. From off, a quick double click cycles quickly through high and into medium. In any mode, double click to access the alternative level for that mode; it will remember the sub-level in each mode. To program the second sub-level for the modes that have them, double click seven times in that mode to access the options for the second sub-level. Just turn off when done, and wait a few seconds and the sub-level choice is memorized.
Okay, maybe that wasn't easier than Zebralight's instructions... oh well, I tried.

-
It does become quite easy, compared to a lot of other types of UI out there!
I especially like the ability to turn on in low mode

-
Actually Heinz that does make sense.

-
@nuphoria said:
It does become quite easy, compared to a lot of other types of UI out there!I especially like the ability to turn on in low mode

That's the beauty of the Zebra UI; instant access to either high or low from off.
The old NiteCore D10's used to have a similar UI, but it was changed when they updated it to the D11. IIRC the enraged outcries of incensed users over the 'new' UI prompted them to release the D11.2 which is very similar to the old UI.
-
@Heinz Doofenshmirtz said:
It does become quite easy, compared to a lot of other types of UI out there!
I especially like the ability to turn on in low mode

That's the beauty of the Zebra UI; instant access to either high or low from off.
The old NiteCore D10's used to have a similar UI, but it was changed when they updated it to the D11. IIRC the enraged outcries of incensed users over the 'new' UI prompted them to release the D11.2 which is very similar to the old UI.
Yeah, I have an EX.11.2 which is like the old UI - it's for sale but no-ones wants it :(
-
@Heinz Doofenshmirtz said:
It does become quite easy, compared to a lot of other types of UI out there!
I especially like the ability to turn on in low mode

That's the beauty of the Zebra UI; instant access to either high or low from off.
The old NiteCore D10's used to have a similar UI, but it was changed when they updated it to the D11. IIRC the enraged outcries of incensed users over the 'new' UI prompted them to release the D11.2 which is very similar to the old UI.
Yeah, I have an EX.11.2 which is like the old UI - it's for sale but no-ones wants it :(
I'd buy a D11.2 if they made one with a neutral emitter.

-
What about a Fenix? They've got a bit of a range of single AA lights, mine's an LD10 which replaced an LD10 that got nicked which replaced an LD01 that got nicked :D
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
