LM Rust?
-
I have never had any rust.....so far. What i've been using on my tools and on my guns is Remington gun oil with Teflon. Is WD-40 better for my tools?
-
I suppose I learned from the time I got my wave rusty by leaving it overnight. Now I dry it right after getting wet, and it appears to be rust free so far.
-
maybe we could do some tests. I'll leave one of mine out all night (on a rainy night)
and somebody else do one, and if we can get several people to do it, we'll have some
better idea's. We can be as scientific as possible, and try to match temps, times, conditions
and as much as possible.of course it wouldn't be totally conclusive but fun :D
idea's? -
The cheap smurf in me would never let myself willingly ruin a tool. Of course if you want to leave your tools out in the rain and relay the info back to us that would be great
>:D >:DJust Kidding
It would be kind of neat to run a battery of tests mythbusters style to see what is the best oil to use and the rust resistance of stainless vs. black oxide.
Wonder if Leatherman has a big textbook of corrosion tests in their vault somewhere they would like to share with us? -
exactly! I'd be willing to "sacrifice" one tool; and besides, most of these name brands would clean up pretty good
even if they did rust some, I'd just like to see which do spot and rust in a controlled/watched test,I'm putting my money where my mouth is!
-
I have started and taken part in many threads about Leathermans rusting . I havnt spoke of it recently because I really dont want to be thought of as a LM basher because their tools are rather good .But the rub is compared to Victorinox they do rust easily . As soon as I can get an old LM thats not worth too much and is all cleaned up and rust free ( I'm not going to use my mint Supertool ) I will put it up against my Swisstool in a salt water test . I dont mind using my Swisstool as its been in the sea many times and still looks like new .
My experiment would involve dunking both tools in the sea then wrapping them up loosly in a towel thats aslo been in the sea and then leaving them outside and taking a photo of them everyday for a week .
Anyone got an old LM ?Dunc
-
Very cool Dunc! and I too will leave my BO Spirit and Blast outside, on a rainy night for say.... 12 hours and see what happens!
I think if a proper way to do it and post my ideas here first to get some feedback.
I'll take pictures, before and after.
-
In response to the WD40 question, WD40 is a great water displacer, good rust remover, and middling lubricant. If you were to use nothing else at all, WD40 would be a good product to maintain your tools. I use it on all my steel tools, especially the high carbon ones; it does a great job.
If you are already using remington oil, I would continue using it as a lubricant, as WD40 is not designed as a lubricant, but works quite decently. I personally use remington oil to lubricate the pivots and pins on all my knives and tools, but WD40 on the surfaces. In contrast to some other chemicals I've used, this combination leaves no slime on my tools, but protects and lubes them very well.
-


My BO SuperTool 200 also has some surface rust in the joints, but is otherwise almost brand new.
Def
-
Aaah good ole WD40 rusts worse nightmare. Give me WD40 some Duct Tape and a PST and I can rebuild Rome :D
IMO wd is just about best stuff I have ever used on any of my tools. Sure I use other oils and things of that nature but WD has never let me down. Keeps things rust free for years or at least to a minimum. :D -
It's interesting to hear people liking WD40, as you hear so many people say not to use it. I use it on my MT's all the time (not my SAK's though) and it has always worked well for me.
-
What kind of oil do you use for your SAKs Ben?
-
I just use a mineral oil. Nothing fancy and is widely available. I don't use a lot of it either, otherwise you just attract dirt.
-
Thanks Ben. I also very seldom oil my SAK and GAK. I just dip the tip of a toothpick in light oil and apply it in pivot points.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login