Hi from down under
-
Hi - I'm a Dutchman living in Australia. Have had a number of multitools over the years, and my current go-to tool is an original skeletool (2009 vintage, I think), and has been for a couple of years of faithful, faultless service.
Am endlessly fascinated by multitools, and need something with a few more tools (stronger pliers, for starters), hence my joining.
-
Hi erratic, welcome to the forum.
As you probably know by now there are lots of choices out there, so you can afford to be a little fussy. I always recommend to people that the think about what features are* most* important to them and take it from there. Also make sure you look at all the manufactures, Leatherman, SOG, Gerber, Victorinox and one or two others, they all do some great products.Tougher pliers than a Skele isn't that hard, most 4" tools will do that. So you need to think what's next on your "wants" list; pocket or belt carry? Screwdrivers? Scissors? etc etc. :)
-
@Gareth said:
Hi erratic, welcome to the forum.
As you probably know by now there are lots of choices out there, so you can afford to be a little fussy. I always recommend to people that the think about what features are* most* important to them and take it from there. Also make sure you look at all the manufactures, Leatherman, SOG, Gerber, Victorinox and one or two others, they all do some great products.Tougher pliers than a Skele isn't that hard, most 4" tools will do that. So you need to think what's next on your "wants" list; pocket or belt carry? Screwdrivers? Scissors? etc etc. :)
+1

Welcome!

-
@Gareth said:
Hi erratic, welcome to the forum.
As you probably know by now there are lots of choices out there, so you can afford to be a little fussy. I always recommend to people that the think about what features are* most* important to them and take it from there. Also make sure you look at all the manufactures, Leatherman, SOG, Gerber, Victorinox and one or two others, they all do some great products.Tougher pliers than a Skele isn't that hard, most 4" tools will do that. So you need to think what's next on your "wants" list; pocket or belt carry? Screwdrivers? Scissors? etc etc. :)
Thanks Gareth. Scissors no - have a small selection of nice ones in the back of the 4wd for when I am out bush. But yes, screwdrivers are a must, and I'd really like something that can take standard screwdriver bits rather than the LM flat ones. Would give me a lot more options - torx, hex etc etc.
No belt carry would be that appropriate here, so weight isn't too much of a concern
-
Welcome erratic
what you need is a wave with a modded standard bit adapter
or a sog powerlock for its compound leverage pliers and 1/4 bit adapter, -
@Zed said:
Welcome erratic
what you need is a wave with a modded standard bit adapter
or a sog powerlock for its compound leverage pliers and 1/4 bit adapter,Having browsed the forum a bit I'm getting the feel for the place. I suspect that when you say to get a wave OR a SOG, you really mean 'get both!' :)
Will check both those out. I've a couple of days off. Sounds like a perfect excuse to go windowshopping!
-
Welcome erratic
what you need is a wave with a modded standard bit adapter
or a sog powerlock for its compound leverage pliers and 1/4 bit adapter,Having browsed the forum a bit I'm getting the feel for the place. I suspect that when you say to get a wave OR a SOG, you really mean 'get both!' :)
Will check both those out. I've a couple of days off. Sounds like a perfect excuse to go windowshopping!
He's got your number Zed. :D :D
-
Good to have you here..

-
Welcome aboard.
-
BTW if you pose the question in our General Tool section with all your wants, you'll likely get a bigger response.

http://forum.multitool.org/index.php/board,4.0.html -
@erratic said:
....yes, screwdrivers are a must, and I'd really like something that can take standard screwdriver bits rather than the LM flat ones. Would give me a lot more options - torx, hex etc etc.If your screwdrivering tends towards the heavy duty I suggest you also check out the Leatherman "Universal Tool Adapter" which will take any 1/4 bit and fits many (not all) MTs. The bit drivers on LMs aren't super robust, and so are the weak link in the chain. More info here:
</post/595567>
-
Welcome to the
loony binforum.
-
Thanks for the welcome and advice everyone. Appreciate it.
-
We love enabling new members :D
Welcome to MTO

-
Welkom ;)
-
Howdy from Texas!¡!
-
Hi!
-
G'day & welcome mate :D :D
I do like my Victorinox Spirit + ratchet driver kit
. Really needs to stay in the sheath so pocket cary is a little tricky but not impossible




-
I have a homemade universal bit adapter for my Charge -
Take a normal bit extender and grind it down thusly

Universal bit adapter ahoy!

Also - welcome!
-
Welcome aboard

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login