Some 58mm mod tips
-
I had fun with some 58mm used saks!! I made old patina white ash and used copper electrical wire as rivets.I think it turned out great for a beginner.

I thought it would be nice to give some tips from my small experience with the small 58mm.
I found that the original brass bushing is a good base for a nice round rivet heads...plus, it help for a beginner in peening to have that ''extra'' mm from the bushing to prevent hit the scales much.
Another tip is reinforcing the scales by reusing the bushing to make a vintage looking SAK or maybe replace the broken scale of an old apparent rivet 58mm



Excess of the copper electric wire sanded down to the bushing.

Cool shot in Victorinox box!!

-
Cool! I really like the look of the exposed bushings like that.

-
Very nice.
-
Thanks to you both

BTW, you have to be really careful when peening on wood scales because it can easily make a crack also depending on which wood you choose. I choose white ash because it is what I got on hand first :P but also because it is a light and hard wood used for tools handle such as ax.
-
Lovely job - very useful pics too

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login