Ideas for small plier tests
-
As I've done with scissors, I was trying to come up with a way to rate small pliers. Doing so would require a battery of tests that one might expect to use small pliers for. I was hoping you fine folks might want to put in some ideas of ways you might expect to use small pliers. I suppose I mean beyond the obvious 'turn nut' and 'cut wire'.
Some thoughts I've had:
Picking small object off of flat surface (like a needle or pin) which would show precision of tips
Untying knots
Holding needle for heavy sewing
Bending coat hanger
Pulling wood staples
Crimping lead sinkers for fishingUnfortunately, these have to be repeatable tests, so 'plucking splinters' and 'dislodging fish hooks' and things like that won't be in the battery.
Anyone care to chime in? I would appreciate ideas.
-
not sure this'll make sense (it does to me but that means nothing
)
when trying out 'full sizes plier based multis, i often get a stack of coins (one pennys are good) and test to see how many you can grip AND apply preasure too while still being comfy.*might help to try it, and you'll see what i mean ....hopefully

-
Bend open and remove staples from paper, perhaps? Requires some force, and some control, to remove the staple without tearing any paper. And grabbing the "feet" of the staple to bend them open is an easily repeatable test of gripping ability when it's not a lot to grab on to.
Edit: Oh, and btw, I hardly ever use small plier to untie knots, but I certainly use them to to tighten precise, hard knots in hard to reach places. So tightening a knot in e.g. some kind of paracord or other synthetic line could be a test too.
-
Good topic! There's an obvious one, removing nails of various sizes from a wall or a piece of wood. The former requires a wall one doesn't care for so it's not easy but I think it can be revealing. The latter is relatively easier as a piece of wood you can step on could do it ( :( please don't start hurting trees people :) )
-
Dislodge fish hooks! You just have to catch a lot of fish! (Or use the same poor fish a lot) You could try the precision of the cutters by cutting string with them or something?
-
Pulling blade fuses?
Cutting very fine stranded copper wire (alarm cable?)
Tightening/Loosening a small bolt?
Pulling hubby's nasal hair? (Wait till he's sleeping)
Pulling a small nail/tack ... something like a panel pin which has a small head and is almost flush
-
How about tightening a recessed nut at the tip? Test the reach, how fat the pliers are etc.
-
A task I find myself doing with SAK pliers more than any other is making small one-time use tools out of paperclips for various tasks; re-set switches, dislodging stuck Lego pieces (my son is a bionicle/hero factory fanatic, and he regularly asks my help getting two very small pieces apart), and so on. So, perhaps one test would be how small of a detail you could make in a paperclip or piece of wire. I'm sure there are many more applications, I just can't think of more off the top of my head.
-
@50ft-trad said:
Pulling blade fuses?Cutting very fine stranded copper wire (alarm cable?)
Tightening/Loosening a small bolt?
Pulling hubby's nasal hair? (Wait till he's sleeping)
Pulling a small nail/tack ... something like a panel pin which has a small head and is almost flush
all joking aside, I test out how well my MT pliers work as "substitute tweezers" by pulling out an arm hair or two. Skeletool pliers perform remarkably well in this test.
-
Great idea and a really good list of tasks so far

I use them for opening and closing jump rings when making chain mail. If they are too stubby, not grippy or just uncomfortable to use they are not good to me.
-
something I use them for but might be hard to replicate for you... if you've got a load of DIN rail terminals* in a row and want to put a couple of wires in an inner one, you need fairly fine pointy pliers that don't mar up the cable too much. It tests reach, how firmly the pliers hold the cable, how sensitive they are, how clumsy they are when you're trying to manoeuvre it etc. If you wanted I could takes some pictures in my lunch break next week.
- DIN rail terminals: in an electrical cabinet, a lot of components are mounted on stuff called DIN rail, it's a standard width to which you can clip things. The terminals usually provide an interface between the internal wiring which might be done in advance by a panel builder and the external circuitry that's put in by the installing electrician. They come in a range of sizes but I use a lot that are about 3-4mm wide.
-
pull a tooth

-
Toss a bolt and nut on an upside-down torque wrench and see how much torque can be applied comfortably?
-
Test the ability to pick up heavy things. Multitools are great for moving stuff on a stove or putting a burning stick back in the fire camping.
-
My main use for submini. pliers was for small parts , such as in locks . Pulling jumpers on dense cct. boards .
The ability to grab hard to reach small nuts is another good test .
In re : cutting , I don't think anything much over 22-24 AWG wire is a fair test .
Chris
-
Paracord tying, untying.
Small bolts/fasteners -
Wow. I didn't know if there'd be any thoughts on the matter. I very much appreciate the input. Please feel free to keep it coming. Some great ideas I'm certain to use, and some great ideas I'm not sure yet how I'd be able to consistently emulate. But that'd be the next problem, and I'm still in brainstorming stage.
Thank you, all.

-
Plucking out a hair.
-
Squeeze test on aluminum tubing maybe :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
