Jucies falling apart!
-
Hello everyone!
I'll be as brief as i can. A while ago i won this bid for a lot of Leatherman tools, two of them being of the Juice line, one a Juice XE6 and the other a CS4. When the parcel arrived i found out the tools contained were freaking dirty and covered in grease and grime, they even smelled bad. So i decided to take them all in a cycle of washing with dish soap and hot water and brushing them with WD40, letting them rest drenched then letting them dry under the sun. It happened that at a point, after washing the Juices in hot water and thinking they were clean enough i wanted to try the saw of the CS4 on a small branch i had to cut anyway. When i took the saw out and began to apply some force cut-wise, surprise!, the saw leant backward, passing the point where it should stop and be able to take all the strength put in for the cutting. Same over-leaning backward happened to the awl which you know lays on the same line of the saw. It seems that the layer/spacer which also works as the locking "spine" for the saw and for the awl too, has come out and is free, falling out. Inspecting the XE6 i found out it happened almost the same, this time involving the scissors too. On the XE6 came out a couple of this layer/spacer/spine bits.
I'm quite deluded. When i first handled the Juice Pro i felt it was well made and robust and i thought all the Juice line was like that, well, i think i was wrong.
Has anyone on here had the same breakage happening?
Do you think i should send them in for warranty repair? If i do that and they fix them or send new ones be sure they'll be in the trade section on here. I think i found the Juices are not for me if they can't stand a warm bath.
Greetings!



-
Send them to LM. They'll send you new ones as they don't fix Juices.
-
@stealth007s said:
Send them to LM. They'll send you new ones as they don't fix Juices.The problem with that is that as they are second hand tools we have no idea what abuse they went through to end up that way. :-\ Personally I'd be looking for my money back form the seller, unless he described them as broken.
-
@SolomonKane79 said:
Hello everyone!
I'll be as brief as i can. A while ago i won this bid for a lot of Leatherman tools, two of them being of the Juice line, one a Juice XE6 and the other a CS4. When the parcel arrived i found out the tools contained were freaking dirty and covered in grease and grime, they even smelled bad. So i decided to take them all in a cycle of washing with dish soap and hot water and brushing them with WD40, letting them rest drenched then letting them dry under the sun. It happened that at a point, after washing the Juices in hot water and thinking they were clean enough i wanted to try the saw of the CS4 on a small branch i had to cut anyway. When i took the saw out and began to apply some force cut-wise, surprise!, the saw leant backward, passing the point where it should stop and be able to take all the strength put in for the cutting. Same over-leaning backward happened to the awl which you know lays on the same line of the saw. It seems that the layer/spacer which also works as the locking "spine" for the saw and for the awl too, has come out and is free, falling out. Inspecting the XE6 i found out it happened almost the same, this time involving the scissors too. On the XE6 came out a couple of this layer/spacer/spine bits.
I'm quite deluded. When i first handled the Juice Pro i felt it was well made and robust and i thought all the Juice line was like that, well, i think i was wrong.
Has anyone on here had the same breakage happening?
Do you think i should send them in for warranty repair? If i do that and they fix them or send new ones be sure they'll be in the trade section on here. I think i found the Juices are not for me if they can't stand a warm bath.
Greetings!
Yah, those are the back springs, I have extra ones if you want to try. Installing them is a snap if you know what you are doing (I did a pretty detailed description of how to do it in my SMOOTHIE thread).
There are so many individual parts in a Juice (especially on the larger ones like the XE6 and CS4) that a seller that doesn't know what they are looking for may miss it.
Leatherman will do one of 2 things:
- Replace it with brand new ones
- Install new springs
-
@stealth007s said:
Send them to LM. They'll send you new ones as they don't fix Juices.**Thank you!
**It is not the place but i just say i didn't have a great experience with the way the Leatherman warranty is handled in my country.Send them to LM. They'll send you new ones as they don't fix Juices.
The problem with that is that as they are second hand tools we have no idea what abuse they went through to end up that way. :-\ Personally I'd be looking for my money back form the seller, unless he described them as broken.
Thx Gareth
There's another problem unfortunatley, the freaking Juices came in a larger lot along with many other LM i like like a PST, a Kick and other tiny ones...
[quote]Yah, those are the back springs, I have extra ones if you want to try. Installing them is a snap if you know what you are doing (I did a pretty detailed description of how to do it in my SMOOTHIE thread).There are so many individual parts in a Juice (especially on the larger ones like the XE6 and CS4) that a seller that doesn't know what they are looking for may miss it.
Leatherman will do one of 2 things:
- Replace it with brand new ones
- Install new springs
/quote]
Thanks Metro!
but alas i don't think i will venture into fixing them by myself... I simply don't have the skill i think and then you know what, i paid money for these toys, i even had to pay the freaking customs and not few coins! >:( -
A similar thing happened to my s2 can opener
</post/658803>
-
@Likeablefish said:
A similar thing happened to my s2 can opener</post/658803>

-
@Metropolicity said:
Yah, those are the back springs, I have extra ones if you want to try. Installing them is a snap if you know what you are doing (I did a pretty detailed description of how to do it in my SMOOTHIE thread).There are so many individual parts in a Juice (especially on the larger ones like the XE6 and CS4) that a seller that doesn't know what they are looking for may miss it.
Leatherman will do one of 2 things:
- Replace it with brand new ones
- Install new springs
@SolomonKane79 said:
**Thank you!
****It is not the place but i just say i didn't have a great experience with the way the Leatherman warranty is handled in my country.**The problem with that is that as they are second hand tools we have no idea what abuse they went through to end up that way. :-\ Personally I'd be looking for my money back form the seller, unless he described them as broken.Thx Gareth
There's another problem unfortunatley, the freaking Juices came in a larger lot along with many other LM i like like a PST, a Kick and other tiny ones...
[quote]Yah, those are the back springs, I have extra ones if you want to try. Installing them is a snap if you know what you are doing (I did a pretty detailed description of how to do it in my SMOOTHIE thread).There are so many individual parts in a Juice (especially on the larger ones like the XE6 and CS4) that a seller that doesn't know what they are looking for may miss it.
Leatherman will do one of 2 things:
- Replace it with brand new ones
- Install new springs
/quote]
Thanks Metro!
but alas i don't think i will venture into fixing them by myself... I simply don't have the skill i think and then you know what, i paid money for these toys, i even had to pay the freaking customs and not few coins! >:(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
