Spirit bit adapter?
-
I just tested my Gerber Bit adaptor (the one for the MP 600/400 with the square 3D Phillips) and teh Leatherman Bit Adaptor. Both wiggle a little as the Phillips head tapers unlike on the LM and Gerber, but both do work.
No Camera ready right now, but i guess you can imagine how it looks ;-).
-
Would the Bear & Son bit adapter work any better on the Spirit? Chako, can you check?
-
Any other ideas? I have a chapman ratchet that comes in very useful. Just looking for something different ;)
-
If you are looking for some thing that works with standard 1/4 bits. A ACE cr-v 1/4 in square drive to 1/4 in screwdriver bit adapter almost fits Spirit flat screwdriver will work as is but needs to be fitted by modding the screw driver or adapter and adding a magnet then bed it with J-B Weld.
Mike -
@Mike 56 said:
If you are looking for some thing that works with standard 1/4 bits. A ACE cr-v 1/4 in square drive to 1/4 in screwdriver bit adapter almost fits Spirit flat screwdriver will work as is but needs to be fitted by modding the screw driver or adapter and adding a magnet then bed it with J-B Weld.
MikeI'll pick one up and give it a shot. Thanks
-
Here is a old thread on making a bit adapter for SAKs. Thought it might help. </post/379857>
Mike
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login