Alox mod question
-
Ok, I know this has to be here somewhere, but I don't feel good tonight and I don't feel like searching for it.
I have the necessary supplies to make an Alox knife with 91mm Vic scissors, and I'm considering making it a single layer, just scissors, considering that's the SAK tool I use 99% of the time anymore. I'm still on the fence though, I might decide to add a knife blade layer. Either way the only real question I have is how to mod a spring to fit. I've heard that a plier layer spring will work but I haven't laid the stuff out to see how. Anyone got some advice on this? I don't have any machined pivots, only pin stock that is leftover from my modding venture a few years ago.
-
The first question is: Do you want 93mm or 84mm Alox?
-
There is a sticky somewhere as well as a video on youtube showing how to do it. Look for farmer scissors mod on youtube IIRC
</post/695993>
also
</topic/38073
If you have one of the old saks with a smooth scissors backspring, you can use that spring. Just a bit of drilling!
-
I used to use the backspring from an alox solo for scissor mods, and it worked out pretty decent.
-
Thanks for the links!
I want a 93mm for sure. I don't have a solo or a smooth scissor spring so i will have to improvise.
Sent from my Galaxy S3 using crapatalk two point oh.
-
Ive bought solos from this german ebayer recently and it was a smooth transaction, if you end up needing one.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login