Stripped Torx Screw
-
Is it the star pattern on the head that is stripped, or the threads?
If its the head, I've had luck in the past finding a flat head just the right length to fit in between opposite points of the star and slowly backing it out.
Good luck

-
that happened to me time ago, i had to use a carbide cutter to behead the screw

-
Dremel a flat blade screw slot into the head?
-
ime, Torx are a lot harder to strip than many others like Phillips.
In fact, I think I'd rate Torx as one of my favourite fasteners. Bit sad really! -
For actual screws not bolts etc. I use these
http://www.sears.com/craftsman-drill-extractor/p-00952152000P?prdNo=7&blockNo=7&blockType=G7
Works very well it's its just the screw head and not rusted or locked in place.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login