Multi-Tool modded for keys
-
So... wow... this is an amazing forum. After many google searches, Multitool.org kept popping up. I read more and more. I learned a lot. Most of what I learned is that I dont know very much. I'm out of touch with the multitool world. I intend to correct this. I also apologize if this is TMI.
I come here, asking for help and suggestions. And when I created my account, I realized there were many different categories than I originally realized... several of which might fit what I'm looking for. Ultimately though, I want to mod.
I got into Kickstarter. I backed one project, the Keyport Slide. Seemed like a great idea. I still haven't received it yet.

Then I started slimming down on what I carry around with me. I'm turning into a minimalist, with a modern twist. I cut down all my keys to only what I use daily or weekly. Thats two keys (car and house). Then I added a titanium bottle opener I got from Kickstarter.

Then I decided why have a keychain when I can combine them into a single product similar to this:

Then I learned about modding. Its cheaper than these kickstarter projects, AND I can make it how I want it. So I found out about people modding some large leatherman pliers and allen wrench tools. I bought myself one to mod. I will receive it in the mail tomorrow.

Then I thought... Why not spend a little more and get something I'll get more use out of? This is where all my research came in, and where you guys have really come in handy. I started looking at various leatherman and gerber products. I mostly like the Leatherman CS and Gerber Dime so far. Do you guys have any recommendations? Obviously it needs to be a tool that I can undo easily, with Allen or Torq screws holding it together. I'd also like the keys (and other tools) to fold out even when the pliers are closed. A bottle opener thats ready to use on the outside. Other tools don't matter as much... but pliers would be great as well as knife, screwdriver, and tweezers would be nice. Obviously I'm going to have to cut out two tools of whatever is in there to fit in my keys.
Which is another question - is there SPACE in a tool like the Dime to put keys in? The more I research them, the smaller they seem... perhaps the tools I would take out would be thinner than my keys.
Thanks for any help you guys may offer! I hope my first post didn't give anyone a heart attack!
-
Hi, welcome to the forum, and the mod squad! :D
I personally havent done the add a key to a tool thing but I know there are projects somewhere around here where people have added keys to a leatherman p4, and I know other tools, but I cant think off the top of my head which ones.
I'll post some links if I remember where I saw them. :D
-
There certainly are a few similar mod ideas around to accommodate keys.
Seen a few done with the bike type tool you posted, and with a Micra or PS4 sized tool.
I think it's a pretty cool idea and as you can customise whatever tools you want to add to your keys, the possibilities are endless :DGood to have you with us

-
The gerber curve works well for a key mod.
-
Welcome to the forum.

I'd like to see what you come up with with your key mod. There have been quite a few around. try searching for key mod here, lots of results. :ahhh
I've tried a lot of these key mods throughout the years.
Riveted keys.


Leatherman PS4 with a key instead of the scissors.

Leatherman Style CS with a key instead of the knife

and a couple others
Ended up going back to the more traditional carry. (had to send the MTO prybar on it's way though but I still miss it :'( )

Whatever you decide on doing, take a lot of pictures of the process. And then show them to us. We love seeing how a mod is made. :D
-
Thanks for the welcome, yall.
Still can't decide which tool to go with. I might just have to suck it up and buy several, then see what works best with what I want.
Also received my Crank Brothers 5-piece today. Already have problems. All my keys have holes that are too small! Gonna have to go stock up on some duplicates, especially my car key if I plan on ripping apart the head. It has no chip in it.
Nice mods, enki_ck! How many women swoon when you pull out one of those to unlock the door for them?
-
I have been thinking about multikeys too. I'm going to try it on something cheap and nasty (that has bolts for easy tinkering). Leathermans and the like are expensive here and I couldn't bring myself to taking useful stuff off one to replace with keys.
Other things I would like to have on it are:- small LED torch - needs to shine toward the extended keys (meaning all the keys would need to be at one end - or at least the ones you're most likely to use at night)
- pocket clip
- bottle opener
- screwdrivers possibly, maybe get a tool that already has a couple on
This would just be a key ring really so no need to use a plier-type multitool. The torch would be the hardest thing, especially finding one small enough. Something like the one on this: http://www.ebay.com/itm/Outdoor-Home-Multipurpose-Pocket-Knife-Multi-tools-Vise-Screwdriver-Opener-LED-B-/271121278584?pt=LH_DefaultDomain_0&hash=item3f20166678 ? Type and number of batteries it uses could be a factor too.
The keyport looks cool, but man, what a faff! And cost!
EDIT: Just re-read your original post, looks you want to add keys to a multitool, rather than create something just for keys which is what I want to do - I'll start another thread if I get anywhere.
-
Well, I just don't have enough keys that I use daily to warrent something ONLY for keys. There are several kickstarter projects that do just that, although quite expensive when considering the cost for multitools. It'd be easy enough for you to simply gut a multi tool completely and add in your own keys and light or whatever.
Perhaps you want more keys than me, but otherwise it sounds like we want the same thing. I wanted a multikey device, and multitool devices were easy enough, plus I'd have additional tools along with my keys.
Anyway... I would LIKE a small torch as well, though I haven't gone on the hunt for one yet. The one made by Keyport is the size of a key, so would be pretty doable... but again (and I agree with you here), the cost. They seem to take pride in their uniqueness. To top it off, their LED torch doesn't have a replaceable battery. Which honestly, is probably why its so much slimmer.
I went to get some copies of my key today. I don't think the machine is calibrated right. The key worked, but I had to insert the new car key, then remove it just a single millimeter for it to work. What a hassle! I'm going in again tomorrow to see if someone else knows more about the machine than the guy today.
-
It was inevitable.... I started looking at lights already.
Perhaps something like this you can modify to your needs:
http://www.amazon.com/40-Super-Bright-Finger-Flashlights/dp/B0018LAGZY/ref=br_lf_m_1000965411_1_4_ttl?ie=UTF8&s=hi&pf_rd_p=1559517242&pf_rd_s=center-3&pf_rd_t=1401&pf_rd_i=1000965411&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1WK5Q1C5JF8MYA4W3H7C -
I picked up something similar to this http://www.ebay.com/itm/New-2-in-1-Mini-LED-Red-Laser-Pointer-Keychain-Flashlight-Green-/261215171189?pt=US_LED_Light_Key_Chains&hash=item3cd1a33275 yesterday, although I would prefer something smaller.
Perhaps I should get this http://www.ebay.com/itm/SNAP-ON-TOOLS-Tool-Multitool-Multi-function-Keychain-Flashlight-LED/170997732498?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D261%26meid%3D7875444840772782522%26pid%3D100005%26prg%3D1088%26rk%3D2%26sd%3D181142396473%26 and swap out some of the tools for keys! -
Ah yes... That second link doesn't look too shabby of an option.
I've been researching these multitools even more, and just realized some of my options aren't even close to what I want. I was about ready to just buy a bunch when it suddenly hit me... The Leatherman Style tools don't have many options to take out and reinsert a key (2). Skele tools even less so.
When you want to make a key mod, removing most of the tools to replace with keys, leaving in only the main pliers/scissors doesn't really make much sense. Again, keeping to something that folds out when closed, has a bottle opener even when completely closed, and is fairly small. Keychain sized. This doesn't leave many options. Ordering myself a Gerber Dime and a Gerber Curve, although I feel that the keys are going to take up enough space that I'm going to end up gutting the thing anyway.
-
I have a house key and keys for two gates to get through (I live in a zoo) so my project will be just for these (and the LED torch to help find the locks in the dark) - so really just a souped-up keyring. I have a Skele but only really need it for work so its not always on me. But anyway...
Perhaps you could add a new layer to one of your multitools? A "key layer"??? -
@Syncop8r said:
I have a house key and keys for two gates to get through (I live in a zoo) so my project will be just for these (and the LED torch to help find the locks in the dark) - so really just a souped-up keyring. I have a Skele but only really need it for work so its not always on me. But anyway...
Perhaps you could add a new layer to one of your multitools? A "key layer"???Hold up, you live in Orana? That is awesome! I'm just down the road a bit.
-
Haha, yip, BUSTED! :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login