Mini maglite LED conversion without kit
-
I have a few maglites lying around. Most are newer LED versions. I still had an older xenon lamp one though and when the bulb broke (again) I decided to convert it to LED. I know there are a number of online kits available to do this, but I don't want to pay for one of those. So I decided to convert it to LED myself. So I took the LED from this broken coleman lantern.

And I hot glued it to the maglite after putting the wires in correctly.

Aaaand...


It works! And unlike the online kits in which you put in a new parabolic mirror and replace the end cap with a cheap push button switch, I didn't have to make any modifications to the flashlight.

So if you have an LED of adequate lumens for your needs, this is a very simple mod to do. And unlike the online kits the flashlight retains the simple twist on/ off function that people love or hate. -
Nice one mate. I do love a bit of creative recycling.

-
Nice hack. What driver did you use ?
-
Kool,
nice job, JR -
very cool mod

-
I just checked and that lantern is rated at 105 lumens. This is more than the standard mini maglite LED which has 77 lumens.
-
Nice hack. What driver did you use ?
Driver for what? The only driver I used was a #1 philips to take apart the lantern.
Most LED torches have an electronic driver between the batteries and the LED. The electronics control the current and voltage to the LED. This is done so that as the batteries run down you still get the same light output.
With no driver you are running what is termed "direct drive". So as the batteries run down the light output will also dim. Normally with direct drive the light will be very bright with new batteries and then dim down.
There's another very popular mini Maglite mod here on BLF - http://budgetlightforum.com/node/1642
-
Nice hack. What driver did you use ?
Driver for what? The only driver I used was a #1 philips to take apart the lantern.
Most LED torches have an electronic driver between the batteries and the LED. The electronics control the current and voltage to the LED. This is done so that as the batteries run down you still get the same light output.
With no driver you are running what is termed "direct drive". So as the batteries run down the light output will also dim. Normally with direct drive the light will be very bright with new batteries and then dim down.
There's another very popular mini Maglite mod here on BLF - http://budgetlightforum.com/node/1642
I have done that mod and its not as easy as it looks :(. However it would be easier if you had a friend in a machine shop.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
