Knife design
-
Have you thought about angling the blade slightly up similar to the Kershaw Needs Work? It makes it much easier to use the entire blade length on flat surfaces.
-
I like it :) I usually like the look of less pointy blades, though I don't really have one... But, like I said, looks nice, and good suggestions, too

-
Have you thought about angling the blade slightly up similar to the Kershaw Needs Work? It makes it much easier to use the entire blade length on flat surfaces.
+1
Then how about adding somewhere for your thumb to sit and a little kick at the back?

I don't have enough steel for that. Some of the steel was cut for another project :(.
-
Here's what I'm going off of.


And one of the knives I like. Special thanks to JaFromMn and TT Tools for the inspiration
.

-
Have you thought about angling the blade slightly up similar to the Kershaw Needs Work? It makes it much easier to use the entire blade length on flat surfaces.
Links or pics of what you mean please :)
I think Jekostas was meaning something like this?
Looking forward to see how this turns out

-
Have you thought about angling the blade slightly up similar to the Kershaw Needs Work? It makes it much easier to use the entire blade length on flat surfaces.
Links or pics of what you mean please :)
I think Jekostas was meaning something like this?
Looking forward to see how this turns out

That looks ok but I like the design I have made. I don't understand the purpose of angling the blade though ???
-
Have you thought about angling the blade slightly up similar to the Kershaw Needs Work? It makes it much easier to use the entire blade length on flat surfaces.
Links or pics of what you mean please :)
I think Jekostas was meaning something like this?
Looking forward to see how this turns out

That looks ok but I like the design I have made. I don't understand the purpose of angling the blade though ???
It raises your knuckles up out of the way, for example if you were cutting stuff on a chopping board
-
Looking good Steve.
keep it up
-
[quote author=jekostas link=topic=47904.msg789442#msg789442 date=1382293185]
Have you thought about angling the blade slightly up similar to the Kershaw Needs Work? It makes it much easier to use the entire blade length on flat surfaces.Links or pics of what you mean please :)
I think Jekostas was meaning something like this?
Looking forward to see how this turns out

That looks ok but I like the design I have made. I don't understand the purpose of angling the blade though ???
It raises your knuckles up out of the way, for example if you were cutting stuff on a chopping board
[/quote]
Ahh I see. Thanks but I think I'll keep it as is :) -

Just to add I have liked the TT blade since JA posted his pictures


-
Steve, are you left of right handed?
I ask cause you say you are going for a kiridashi style edge/chisel ground. I ask cause the real kiridashis are sharpened on the other side as opposed to the western style blades. Gives you the ability to get closer to the object you're cutting. The western manufacturers sharpen the blades on the wrong side cause it looks cooler in the pictures. ::)
Left handed on top, right handed on the bottom.
-
@enki_ck said:
Steve, are you left of right handed?I ask cause you say you are going for a kiridashi style edge/chisel ground. I ask cause the real kiridashis are sharpened on the other side as opposed to the western style blades. Gives you the ability to get closer to the object you're cutting. The western manufacturers sharpen the blades on the wrong side cause it looks cooler in the pictures. ::)
Left handed on top, right handed on the bottom.
Good point ;). Maybe just a standard flat grind then. Hmmm decisions decisions.
-
The wood knife will be easy to sharpen but I dont think it will hold an edge long.

-
Cause that's also the other word for donkey. :D
-
@enki_ck said:
Cause that's also the other word for donkey. :DYup Im a smartdonkey!
Steve how are you going to do stock removal? I really want to get a good belt grinder someday when I learn to make blades but Im not there yet. I have a small 1x30 I use for shaping parts, but it wouldnt be the greatest for blade making. Im still afraid to cut up the damascus I have.
I was toying with making fixtures and milling off the stock but I dont know about that either.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

