Wave Blades
-
yeah its a straight swap.
-
yep, i did the swap on mine(along with many other mods to it...). Very simple process. You will have one washer to deal with(unless you pull the entire pin out and then you have two) the washer/s go on the tool side of the blade. make sure to heat the screws before hand to melt the loc tite(about 10 seconds with lighter with flame on the screw). I don't recall which side is the pin and which side is the screw, but thats pretty easy to figure out. ones you get the screw out, if its on the opposite side of the blade, you will have to push the pin out. I actually have used the screw to assist in that so i dont damage the threads. Putting it back together is just opposite. I would re loc tite as well. takes a t10 security torx btw.
-
Yes it is really easy in did to swap the SB.
You can find one here...
http://pages.ebay.com/link/?nav=item.view&id=350899884233Στάλθηκε από το MB525 μου χρησιμοποιώντας Tapatalk 2
-
It's simple if you have the torx security bits.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login