Super Tinker Search
-
I've finally decided to add a 3 layer 91mm SAK to my small collection.
I'm deciding between a Climber or Super Tinker (do i need a corkscrew or phillips?)In the U.K. there is plenty choice for Climbers but I'm having trouble locating a Super Tinker,
there's one on Amazon UK which is sent from Germany.Is there any particular reason that Super Tinkers don't exist in the U.K.?
Dave.
-
@daverobson said:
I'm deciding between a Climber or Super Tinker (do i need a corkscrew or phillips?)I like the way the Tinker feels in the pocket with the Phillips screw driver sitting flush with the scale as opposed to the corkscrew sitting up higher. However, I have always found the back spring Phillips almost worthless. I carried a Climber or a Spartan for years with a mini-driver inside the corkscrew. The small flathead on the can opener will tackle most Phillips heads.
-
Plus you can add a small screwdriver to the corkscrew and there's lots of uses for it.
Go Climber!

(edit: must read the complete posts before submitting my own...)

-
I think the comments on the mini screwdriver have made my mind up.
I'm going for one of these in Black! (Wish they did them in Black Nylon Scales)!
-
@daverobson said:
I've finally decided to add a 3 layer 91mm SAK to my small collection.
I'm deciding between a Climber or Super Tinker (do i need a corkscrew or phillips?)I had a run with only the Climber for a month.
I find that I missed the T-phillips more than I used the corkscrew. When there's wine around, there always seems to be a corkscrew. On the odd occasion when that's not the case, I always have the presences of mind to bring a SAK with corkscrew, because it is a real thrill to deploy it to the amazement of onlookers. One has to first plant a sense of panic that there's no corkscrew. Then, when things are really looking bad, loudly say: "Oh wait! I have a corkscrew on my Swiss Army Knife! :D "
It is true that the small screwdriver tip on the can opener will work as a #2 Phillips pretty often. But one can't apply a lot of torque to it, or it'll either slip out or fold up on you. The T-Phillips of the Super Tinker is a better tool for those tight Phillips'. (assuming the T-handle can reach in there.)
You might also consider the Spartan Lite model. In that model, one gives up the scissors in exchange for a proper in-line Phillips and an LED flashlight. While the scissors DO get used a lot when I'm packing a SAK with them, I have to admit that 95% of the time, a sharp knife blade would also do. In contrast, when you need a good Phillips, nothing else will do. You still keep the can opener. The LED light is not very bright, but in pitch darkness, it can be a real life-saver.
Lastly, if you don't have an Explorer, get one. I've gotten used to that fourth layer now, and I don't mind the one extra layer of thickness, and it is SO nice to have the inline Phillips AND scissors, while keeping a full complement of blades, openers, and flat screwdriver tips. One ebay seller in the US sells Explorer Plus' with one's initials stamped onto the main blade, and translucent scales.
-
I also sort of by accident did the Climber 30-day challenge.
I never needed a phillips the whole time. I also never needed the corkscrew. On virtually every occasion in the past year or two when I DID need a phillips, the can opener worked fine.
I bought a climber some time back, and just didn't feel like it was for me. Then in Late October, I went to Florida, by air, and needed to pick up a tool down there. The best value for money I could find was a Silvertech Climber.
It did a great job. I was quite pleased. I'll be keeping it now.

-
@Smaug said:
It is true that the small screwdriver tip on the can opener will work as a #2 Phillips pretty often. But one can't apply a lot of torque to it, or it'll either slip out or fold up on you. The T-Phillips of the Super Tinker is a better tool for those tight Phillips'. (assuming the T-handle can reach in there.)Lastly, if you don't have an Explorer, get one. I've gotten used to that fourth layer now,
I had nearly gone for the Climber there & now you've stopped me!
I'll have to either give this more thought or just buy both!As for the mention of a fourth layer, I have a Fieldmaster at the moment & just thought of going down to three layers for everyday pocket carry.
-
I strongly prefer the tinker, super tinker, and deluxe tinker to their corkscrew counterparts. I will never need a corkscrew and it sticks out further than the phillips. So while the phillips isnt perfect being a T handle, its better than a corkscrew. Never missed the small driver, tip of the small blade works in a pinch.
Go Tinkers!
-
I have both and to be honest I have never used the corkscrew, as for a tight screw the can opener will fail. I say super tinker or like others said a inline Phillips.
Swiss Army knives .
-
@Syph007 said:
I strongly prefer the tinker, super tinker, and deluxe tinker to their corkscrew counterparts. I will never need a corkscrew and it sticks out further than the phillips. So while the phillips isnt perfect being a T handle, its better than a corkscrew. Never missed the small driver, tip of the small blade works in a pinch.Go Tinkers!
This!
-
I'll weigh in on the side of the Climber over the Super Tinker. I have and like both, but feel the corkscrew offers more functionality and versatility than the back side Phillips for general carry. I've yet to come across a #1 or #2 Phillips screw I couldn't handle with the can opener due to tightness of the screw, so the only real added advantage of the back side Phillips is the ability to access recessed screws. The corkscrew, besides the obvious task of opening wine bottles, is handy as a sort of marlin spike for untying knots, and also holds the useful mini-screwdriver. Plus, if someone cuts you off in traffic, you can hold up your Climber and say, "(Cork)screw you!". ;) Climber FTW
-
@nate j said:
I'll weigh in on the side of the Climber over the Super Tinker. I have and like both, but feel the corkscrew offers more functionality and versatility than the back side Phillips for general carry. I've yet to come across a #1 or #2 Phillips screw I couldn't handle with the can opener due to tightness of the screw, so the only real added advantage of the back side Phillips is the ability to access recessed screws. The corkscrew, besides the obvious task of opening wine bottles, is handy as a sort of marlin spike for untying knots, and also holds the useful mini-screwdriver. Plus, if someone cuts you off in traffic, you can hold up your Climber and say, "(Cork)screw you!". ;) Climber FTWThis is basically what I was going to say. I feel virtually the same. I personally use the corkscrew and mini driver in the corkscrew much more than the back side phillips. Im not saying the back side philips is useless but for me it basically is. With that said, the Deluxe Tinker rocks! I just wish it had a corkscrew. :D
-
For me, it is a simple question:
As I am wearing glasses, I need the mini screwdriver. If one of the tiny screws gets loose, it is a safe bet that it will happen in public, on a long walk or somewhere else than home where your screwdrivers are.
Believe me when I say a knife tip would not be sufficient. I once had a glass fall into my ice coffee while being on a day-trip. No chance of reattaching it with the blade of my Classic :ahhh Luckily I was with my GF who could drive us home.So Corkscrew + Mini Screwdriver it is!
-
@captain spaulding said:
Im not saying the back side philips is useless but for me it basically is. With that said, the Deluxe Tinker rocks! I just wish it had a corkscrew. :D
You need a Delux Climber
http://www.sakwiki.com/tiki-index.php?page=Deluxe+Climber -
Super Tinker ALL THE WAY
-
@RT1969 said:
For me, it is a simple question:
As I am wearing glasses, I need the mini screwdriver. If one of the tiny screws gets loose, it is a safe bet that it will happen in public, on a long walk or somewhere else than home where your screwdrivers are.
Believe me when I say a knife tip would not be sufficient. I once had a glass fall into my ice coffee while being on a day-trip. No chance of reattaching it with the blade of my Classic :ahhh Luckily I was with my GF who could drive us home.So Corkscrew + Mini Screwdriver it is!
I had a lot of problems with my current set of glasses with the screws falling out until I put some threadlocker on. They've been fine since.
-
I must have changed my mind a hundred times last night.
At one point I ordered a climber in black & two minutes later I cancelled the order!Decision made:
SUPER TINKERI can get one imported from Germany via Amazon UK
Now all I need to do is find a supplier for Black Nylon scales a bit closer to home.
$17 shipping from the U.S. is a bit much!Thanks for all the replies Gents.
Dave
-
Good decision Dave!
If you find you want a Climber later,well,they're not too expensive
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
