Making a SOG, Leatherman type box sheath.
-
I promised to show how I make these in another thread.

To make this more realistic for members here to do I have assumed only basic tools are available. I did however use the correct tool for fixing the snap on the front but when you buy these the tool normally comes with them.

First make your leather straight and square on one edge.

next use the measurements on he paper NOT THE ONES ON THE LEATHER i marked that wrong (it was early, i had a hangover).

Sent from my Hudl HT7S3 using Tapatalk
-
join the two pieces. the sak awl is too thick to make the hole trough both pieces and will leave you with too big a hole so make the hole in one piece then mark the hole positions in the other piece,then make the holes. Attach together using the split pins, pliers and alot of swearing.

now attach the little tab using the elastic bands to hold the leather in shape.

Pass the leather strap up the back and attach

now put the multi in a sandwich bag to protect it, wet the leather push everything back into shape and hold with the bands again and allow to dry

Sent from my Hudl HT7S3 using Tapatalk
-
Use the scissors or knife to cut a little way down the front on each side.

then use the knife the join the cuts across the front. finally use the scissors to cut the sides to shape.

next attach the snap, shape the front and your done.

Sent from my Hudl HT7S3 using Tapatalk
-
for a smaller multi (pst) change the width from 11cm to 10cm. this gives you 3.25cm on either side of the bottom piece which needs to stay 3.5cm wide. providing your leather is not too thick this should give a good fit.
Sent from my Hudl HT7S3 using Tapatalk
-
After mucking up Marks pictures I've finally got them working. Sorry mate. :-[
Good guide.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

