Question about a quick SAK mod
-
Very simple question...
How simple is it to drop a corkscrew out and put a Phillips into a two layer SAK?
-
-
Thank you sir

That was pretty much what I was hoping!
-
What ya making?

-
Thinking of dropping a the CS out of a Compact,making a spear pointed DofE
-
@ kirk, Me too.


till i did. (really clean look IMO) Then I realized...I don't use either. :D ;)
Good luck.I will add from my experience (I'm no master modder) the back tool swap becomes more difficult the more layers.
Both neil and Syph show a single layer SAK being modded. Easy peazy. Try getting everything in place when the tension from the other tools and springs are working against you. Plus the hook layer is the worst.I was replacing/removing the hooks from a Voyager and Traveller (Hook/w file) so all the back tool had to be removed and then reinstalled. (a female dog to say the least)
What might work easy (ish) is to drill out the brass then use use the new brass to knock out the old pin. Feed it all the way through then partially knock it back out so only the CS will come free.
The couple of three layers I did were a pain and I needed a type of C clamp to compress each back tool individually. (tried a vice, just bent/flexed the liners and did not work at all) Then I needed to feed the brass through but only far enough to catch but not pass the opposite sides liner. Then rinse and repeat. (took way longer than you'd think)
-
Oh, and I forgot to mention.
Totally worth it.
Give it a go.
I love me some modding.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login