Blade Holder - Prototye
-
So from the beginning I loved the idea of a blade exchanger for t-shanks. So I was thinking about making blade holder (just in case I ever get a Surge).
Keep it Simple
Well my skills as fabricator are very limited, so I decided that the design has to be as simple as possible. That basically means as few parts, keeping it simple AND have as few moving parts as possible.
Make it Small
I don't have to comment on this, do I? However, small bears the risk of not being comfortable in the hand.Frame: Simple U-shape.
Inset: Made from 3mm thick material. Main chamber 10x92mm, 2.5mm deep. The actual holding groove is only 1.75mm deep. Two sets of grooves for the shanks wings (one in closed state and one in opened state that way the shank does not stand out when closed).
Screw: The screw should be ~4.5mm in diameter and fitting the front bottom wing to keep the Inset tight when open and closed. It should have a big head so it can tightened/loosed by hand.Prototype
Matching my skills I used "Gliss Hobby Color" (aka poor mans Kydex). The material is way too weak for it to function properly but I can tell that everything about it works. So as a first prototype I'm pretty happy with it.
Also with this design even if it is thin (slightly more than 4mm) it will be comfortable to hold.So where do I go from here?




-
I think it makes a great stand alone little saw!!!
paired with the Surge would just be that much better.
Great start, hopefully someone talented will be along shortly to give guidance
-
Good idea.
I like it. Let's see if we can get it integrated into a multi or SAK. :D -
Like it

-
@enki_ck said:
Good idea.
I like it. Let's see if we can get it integrated into a multi or SAK. :DProblem is the length. For T-Shanks we are looking at roughly 10cm, so unless you want to restrict yourself to shorter ones*, anything smaller than a Wenger Ranger is out from the beginning. With a MT or SAK you probably also want the blade to fold out, so its ready to use, leading us back to a LM-style design. The idea is really to hold the second blade to your Surge.
- The short ones I have are roughly 7.5cm, so we are still talking Vic 111mm or Wave / Charge size.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
