Sharpening a Spirit
-
Just suppose you have bought a Victorinox Spirit and your wondering how your going to sharpen that funny butter knife blade .Well I think any vic fan who isnt a wizard at free hand sharpening should have a Spyderco Sharpmaker .I'm not saying you have to have one but if you want to keep it very sharp and the factory angle then this is a very good way to go about it .
I've recently got a new Spirit and I thought I would show you what happens when you sharpen the std Vic factory edge . The spirit came sharp out of the box and it hasnt cut anything yet . First thing to do is cover the edge in marker pen ink . This is to show you where the sharpening stones are touching the metel when you start sharpening . I used the fine white stones as I new the angle would be spot on and I wasnt going to be removing lots of metal , just sharpening what I already had .So this is what the blade looked like with the marker pen on the edge and before I started to sharpen

Sharpening under way

This is what the edge looks like after a couple of minutes

A couple of minutes more

as you can see the angle is spot on and you can still see the factory grinds which shows I havnt taken off very much metal at all .
The outcome .. Even the serrated section shaves hair :o This blade is very sharp and it took a couple of minutes and it will only take 1 minute to keep it that way every once in a while . With this method victorinox serrations are so easy to sharpen and the best thing about it is it doesnt deform them either .
Dunc
-
Great post dunc 8)

-
I agree!

-
Great mini tutorial mate :)
-
I need to get a Sharpmaker...my Spyderco is dull so I never carry it anymore :-X
How much of using the Shaprmaker is freehand? It looks like you could easily tilt the blade the wrong way and mess it up.
-
@dunc5 said:
Well I think any vic fan who isnt a wizard at free hand sharpening should have a Spyderco Sharpmaker .I'm not saying you have to have one but if you want to keep it very sharp and the factory angle then this is a very good way to go about it .Dunc
Thanks for the 'how to' article, Dunc - excellent illustrative photos.
What sharpening angles does the Sharpmaker offer? IIRC it has two angles available?
What angle matches the Vic factory edge?
Thanks.
.
-
Awesome post Dunc. Very helpful. Thanks
-
@Corrugated said:
I need to get a Sharpmaker...my Spyderco is dull so I never carry it anymore :-XHow much of using the Shaprmaker is freehand? It looks like you could easily tilt the blade the wrong way and mess it up.
Its all free hand :D Its so natural to hold the blade straight at that angle. Sounds hard until you try it .
Dunc
-
Great info in that post Dunc, thanks! :)
-
Great post man, thanks!

-
@dunc5 said:
Well I think any vic fan who isnt a wizard at free hand sharpening should have a Spyderco Sharpmaker .I'm not saying you have to have one but if you want to keep it very sharp and the factory angle then this is a very good way to go about it .Dunc
Thanks for the 'how to' article, Dunc - excellent illustrative photos.
What sharpening angles does the Sharpmaker offer? IIRC it has two angles available?
What angle matches the Vic factory edge?
Thanks.
.
Yes your quite right there are two choices of angles . 30 degree for back bevils and 40 degrees for edge . Its the 40 thats spot on for Vic .
Dunc
-
i use 40" and sharpen both sides,just like sharpen plain edge. >:D
-
Good post. I need to get a Sharpmaker one of these days. Although right now I don't even use the serrated blade since I have a Spirit S with the plain blade too. That way it's always razor sharp for emergencies. I'm used to plain edge anyway so I don't feel like I'm missing anything. It's just nice to have that one always sharp "just in case".
-
I bought a sharpmaker a few weeks ago and now everything in my house is like a razor :D My Spirit S is something else though, cheers for the guide. I have a nice selection of kitchen knives which have all polished up to a lethal degree but the Spirit S is now possibly the sharpest thing i've used, a quality quality blade!
Of course when my other half came round i warned her i'd sharpened up everything in the kitchen, it took her a few hours to shout up to me to come downstairs. She asked me why 'this' knife was so sharp - holding up a medium sized knife. I told her it had taken me ages to sharpen it up, it was dull as hell! Asked her how old it was and if it had ever seen a sharpener before.... Her reply? No of course it hadn't - it was a butter knife

-
@Abstraction said:
No of course it hadn't - it was a butter knife
:D :D
That's the problem with Sharpmakers, you just can't walk past a knife wthout putting a scary sharp edge on it :D
-
I've so got to invest in one. I am hoping Dunc will give us all a demo at the meet. :)
-
-
I've so got to invest in one. I am hoping Dunc will give us all a demo at the meet. :)
How have you not bought one already!! It only took a few posts to convince me i needed one, its not like im easy or anything.... Whats that? Sale well why didnt you say so!!
As everyone on here will tell you, I am very strong when it comes to purchases. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login