Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

Squirt modification

Scheduled Pinned Locked Moved The Mod Squad
59 Posts 1 Posters 11.0k Views
  1. Home
  2. Tool Talk
  3. The Mod Squad
  4. Squirt modification
Squirt modification
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • zepla Offline
    zepla
    Posts: 1,053
    zepla Offline
    zepla
    wrote on last edited by
    #22 Quote Reply

      Yeah, that's what I tought :D

      @ J-sews, #5 srews? I'm not sure if those can be found overhere. At least I did not found anything that would fit snug. But if I ever find them, you suggest just a screw through the squirt and a bolt at the otherside? That's would be the best option I guess. That way I can take it apart if I want to clean it or something like that. But where can I get those right size nuts and bolt? :think: (Sorry, just thinking out loud)

      BTW, any thoughts about a knife locking mechanisme?

      1 Reply Last reply
      • Spork, Lord of Lime Jello! Offline
        Spork, Lord of Lime Jello!
        Posts: 3,516
        Spork, Lord of Lime Jello! Offline
        Spork, Lord of Lime Jello!
        wrote on last edited by Spork, Lord of Lime Jello!
        #23 Quote Reply

          Doh! I was thinking the Juice this whole time :think:...the Squirt is a pretty tiny platform to try to fit a lock into.

          My thought was that the Ladybug blade and locking mechanism could be re-housed between thinner stainless steel liners shaped to match the profile of the Juice handle and bolting it on the side. That would make it unnecessary to take apart the tool...you would just need to drill and tap a couple of mounting holes.

          juicebug01.jpg

          juicebug02.jpg

          1 Reply Last reply
          • Spork, Lord of Lime Jello! Offline
            Spork, Lord of Lime Jello!
            Posts: 3,516
            Spork, Lord of Lime Jello! Offline
            Spork, Lord of Lime Jello!
            wrote on last edited by
            #24 Quote Reply

              Couple more pics...

              juicebug03.jpg

              juicebug04.jpg

              1 Reply Last reply
              • zepla Offline
                zepla
                Posts: 1,053
                zepla Offline
                zepla
                wrote on last edited by
                #25 Quote Reply

                  @SporK said:
                  Doh! I was thinking the Juice this whole time :think:...the Squirt is a pretty tiny platform to try to fit a lock into.

                  Yes, I know now! And that's is exactly what I like about the squirt. It is for me the perfect pocket toy. Only thing missing is a decent locking knife in mho. But thank you for thinking with me. I'm almost getting the feeling that it can't be done :( At least not with my skills and equippment... :'(

                  1 Reply Last reply
                  • J-sews Offline
                    J-sews
                    Admin Team
                    Posts: 23,224
                    J-sews Offline
                    J-sews
                    Admin Team
                    wrote on last edited by
                    #26 Quote Reply

                      @zepla said:
                      Yeah, that's what I tought :D

                      @ J-sews, #5 srews? I'm not sure if those can be found overhere. At least I did not found anything that would fit snug. But if I ever find them, you suggest just a screw through the squirt and a bolt at the otherside? That's would be the best option I guess. That way I can take it apart if I want to clean it or something like that. But where can I get those right size nuts and bolt? :think: (Sorry, just thinking out loud)

                      BTW, any thoughts about a knife locking mechanisme?

                      Yes #5 screws are exactly 1/8" diameter (3.2mm). You would need two screws and two nuts. Although I do not know what you can do about the knife blade being too long.....other than to grind it shorter.

                      Also it will be difficult to make the knife lock open. The "memory steel" you mentioned is called spring steel in English. Perhaps you could get a small piece from some other device, like a spring clip for office supplies.

                      1 Reply Last reply
                      • zepla Offline
                        zepla
                        Posts: 1,053
                        zepla Offline
                        zepla
                        wrote on last edited by
                        #27 Quote Reply

                          Ah ha, "spring" steel. That makes sence :D

                          About those #5 screws I'll find them, I'm sure. I found some Dutch knife makers on the internet. They should have a few laying aroud I suppose. But smart thinking J-sews, regarding the spring steel. I already looked around the house and couldn't find anything I could use. But tomorrow I'm back at the office, there should be something I can use.

                          In the mean time I've gazed at the squirt for quit some time now and perhaps I should try something completly different. Not sure what, perhaps make entirely new handles and just use the pliers from the Squirt. I like the spring loaded pliers and the size of the total package. Or, I do have a spyderco dragonfly laying around, little bigger but very light as well, perhaps that will combine somehow with the pliers and will make a good plan B. But Leatherman and Spyderco do not come cheap over here so can't screw that one up like it looks like I'm doing right now with the Squirt :ahhh

                          Well, first we'll see what I can dig up at the office...

                          1 Reply Last reply
                          • kent ct Offline
                            kent ct
                            Posts: 125
                            kent ct Offline
                            kent ct
                            wrote on last edited by
                            #28 Quote Reply

                              @zepla said:
                              Ah ha, "spring" steel. That makes sence :D

                              About those #5 screws I'll find them, I'm sure. I found some Dutch knife makers on the internet. They should have a few laying aroud I suppose. But smart thinking J-sews, regarding the spring steel. I already looked around the house and couldn't find anything I could use. But tomorrow I'm back at the office, there should be something I can use.

                              In the mean time I've gazed at the squirt for quit some time now and perhaps I should try something completly different. Not sure what, perhaps make entirely new handles and just use the pliers from the Squirt. I like the spring loaded pliers and the size of the total package. Or, I do have a spyderco dragonfly laying around, little bigger but very light as well, perhaps that will combine somehow with the pliers and will make a good plan B. But Leatherman and Spyderco do not come cheap over here so can't screw that one up like it looks like I'm doing right now with the Squirt :ahhh

                              Another thought. How about 1/8 dowel pins. Easy to soften so you can file. Two ten thousands over size so can make a tight very strong pivot. For the ends, two brass bushings which can be riveted into or just Loctite in the bushing. I have spring steel .025 or .63 mm. a bit under 10mm wide, very strong. If you would like to try this I will make the brass bushings and mail you a piece of spring steel the length you need along with the dowel pins which I will soften. Email me if you want to try.

                              Richard
                              Well, first we'll see what I can dig up at the office...

                              1 Reply Last reply
                              • zepla Offline
                                zepla
                                Posts: 1,053
                                zepla Offline
                                zepla
                                wrote on last edited by
                                #29 Quote Reply

                                  Are you kidding me, send something over? :cheers: That sounds great!

                                  But before I ask something like that I'll check out our office supplies first and see if I can make something work myself. And meassure that pin hole exactly, or are you sure that it is the 3.2 mm I think it is?

                                  1 Reply Last reply
                                  • J-sews Offline
                                    J-sews
                                    Admin Team
                                    Posts: 23,224
                                    J-sews Offline
                                    J-sews
                                    Admin Team
                                    wrote on last edited by
                                    #30 Quote Reply

                                      @zepla said:
                                      .........or are you sure that it is the 3.2 mm I think it is?

                                      I can't be absolutely certain, but it would make sense. Leatherman is an American company, and 3.2mm (1/8") is a standard size that pin stock would be available in. The next bigger size would be 3.9mm, the next smaller size would be 2.4mm.

                                      1 Reply Last reply
                                      • zepla Offline
                                        zepla
                                        Posts: 1,053
                                        zepla Offline
                                        zepla
                                        wrote on last edited by
                                        #31 Quote Reply

                                          I can't be absolutely certain, but it would make sense. Leatherman is an American company, and 3.2mm (1/8") is a standard size that pin stock would be available in. The next bigger size would be 3.9mm, the next smaller size would be 2.4mm.[/quote]

                                          That does make sense indeed.

                                          BTW, thank you all for the support :) I really think now it can be done now in a fashion that it works and looks nice. If everything works out allright with this proto, I'll go out and look for a new sheepfoot ladybug and squirt to modify because the one I have is not perfect anymore. Damn the dremel and my not so steady hand :D

                                          1 Reply Last reply
                                          • J-sews Offline
                                            J-sews
                                            Admin Team
                                            Posts: 23,224
                                            J-sews Offline
                                            J-sews
                                            Admin Team
                                            wrote on last edited by
                                            #32 Quote Reply

                                              Good luck zepla! We're looking forward to seeing your results. :)

                                              1 Reply Last reply
                                              • kent ct Offline
                                                kent ct
                                                Posts: 125
                                                kent ct Offline
                                                kent ct
                                                wrote on last edited by
                                                #33 Quote Reply

                                                  @zepla said:
                                                  Are you kidding me, send something over? :cheers: That sounds great!

                                                  But before I ask something like that I'll check out our office supplies first and see if I can make something work myself. And meassure that pin hole exactly, or are you sure that it is the 3.2 mm I think it is?

                                                  Measure the old pin, not the hole. Much harder to measure a hole accurately. If you have a micrometer the exact measurement is 3.175mm or .125 thousands. I am 90 percent certain it is 1/8 inch.

                                                  Richard

                                                  1 Reply Last reply
                                                  • zepla Offline
                                                    zepla
                                                    Posts: 1,053
                                                    zepla Offline
                                                    zepla
                                                    wrote on last edited by
                                                    #34 Quote Reply

                                                      @kent ct said:

                                                      @zepla said:

                                                      ... Another thought. How about 1/8 dowel pins. Easy to soften so you can file. Two ten thousands over size so can make a tight very strong pivot. For the ends, two brass bushings which can be riveted into or just Loctite in the bushing. I have spring steel .025 or .63 mm. a bit under 10mm wide, very strong. If you would like to try this I will make the brass bushings and mail you a piece of spring steel the length you need along with the dowel pins which I will soften. Email me if you want to try.

                                                      I did some measurements, and it looks like you're right al along! It is indeed the 3.2mm you thought it would be :salute:

                                                      I looked in every corner of my office and couldn't find enything usefull. It looks like that I'll have to take your offer :D A :mail: is comming your way...

                                                      1 Reply Last reply
                                                      • kent ct Offline
                                                        kent ct
                                                        Posts: 125
                                                        kent ct Offline
                                                        kent ct
                                                        wrote on last edited by
                                                        #35 Quote Reply

                                                          @zepla said:

                                                          @kent ct said:

                                                          @zepla said:

                                                          ... Another thought. How about 1/8 dowel pins. Easy to soften so you can file. Two ten thousands over size so can make a tight very strong pivot. For the ends, two brass bushings which can be riveted into or just Loctite in the bushing. I have spring steel .025 or .63 mm. a bit under 10mm wide, very strong. If you would like to try this I will make the brass bushings and mail you a piece of spring steel the length you need along with the dowel pins which I will soften. Email me if you want to try.

                                                          I did some measurements, and it looks like you're right al along! It is indeed the 3.2mm you thought it would be :salute:

                                                          I looked in every corner of my office and couldn't find enything usefull. It looks like that I'll have to take your offer :D A :mail: is comming your way...

                                                          Check your mail

                                                          Richard

                                                          1 Reply Last reply
                                                          • zepla Offline
                                                            zepla
                                                            Posts: 1,053
                                                            zepla Offline
                                                            zepla
                                                            wrote on last edited by
                                                            #36 Quote Reply

                                                              Here's a little update of my squirt mod.

                                                              I have contact with Kent, he is going to send me some parts needed for this mod :cheers: And I've contact with Marc, from EDC Depot for a new squirt and Spyderco Ladybug. My plans are to make a proto with the squirt and ladybug that I already have (you've seen the pictures) and if everything goes well I'll make a new one with out all the screwing up I did on this one :D

                                                              Now I'm just waiting for the parts and making plans in my head to make this work. I'll keep you all posted :)

                                                              1 Reply Last reply
                                                              • J-sews Offline
                                                                J-sews
                                                                Admin Team
                                                                Posts: 23,224
                                                                J-sews Offline
                                                                J-sews
                                                                Admin Team
                                                                wrote on last edited by
                                                                #37 Quote Reply

                                                                  Looking forward to hearing more from you zepla :)

                                                                  1 Reply Last reply
                                                                  • zepla Offline
                                                                    zepla
                                                                    Posts: 1,053
                                                                    zepla Offline
                                                                    zepla
                                                                    wrote on last edited by
                                                                    #38 Quote Reply

                                                                      Yet an other small update of my squirt mod.

                                                                      The parts from Kent are in :cheers: Now I have to figure out how the use them. Of course he explained it perfect, it just my idiot brain that is the problem in this equation :-[

                                                                      I'm going to experiment with this and try some designs I came up with. I'm sure I have something to show for it in a few days. (I do have to work some times and spend some time with the girlfriend in between this important project :D )

                                                                      To be continued....

                                                                      1 Reply Last reply
                                                                      • J-sews Offline
                                                                        J-sews
                                                                        Admin Team
                                                                        Posts: 23,224
                                                                        J-sews Offline
                                                                        J-sews
                                                                        Admin Team
                                                                        wrote on last edited by
                                                                        #39 Quote Reply

                                                                          @zepla said:
                                                                          Yet an other small update of my squirt mod.

                                                                          The parts from Kent are in :cheers: Now I have to figure out how the use them. Of course he explained it perfect, it just my idiot brain that is the problem in this equation :-[

                                                                          I'm going to experiment with this and try some designs I came up with. I'm sure I have something to show for it in a few days. (I do have to work some times and spend some time with the girlfriend in between this important project :D )

                                                                          To be continued....

                                                                          I hate it when women and work get in the way of important business! >:( ;) :D

                                                                          1 Reply Last reply
                                                                          • zepla Offline
                                                                            zepla
                                                                            Posts: 1,053
                                                                            zepla Offline
                                                                            zepla
                                                                            wrote on last edited by
                                                                            #40 Quote Reply

                                                                              They never seem to understand my priorities :D

                                                                              1 Reply Last reply
                                                                              • zepla Offline
                                                                                zepla
                                                                                Posts: 1,053
                                                                                zepla Offline
                                                                                zepla
                                                                                wrote on last edited by
                                                                                #41 Quote Reply

                                                                                  Getting on the way but missing a small drill bit now. Broke all the small ones when trying to make a hole in the springsteel I got from Kent. To bad the shopes are closed now and now my little project is on a hold.

                                                                                  Notice the mess I've made by just fiddling about with a squirt. Imagine what I can do with a larger tool :D

                                                                                  Oh, and just onother thing I would like to mention. I ordered some stuff by edcdepot and payed for it already. Today I recieved a mail from Marc that I get some money back due to a change in shipping costs. And that the package is on its way. :salute: for Marc, a honest guy running a honest shop. I have to say, that's rearly found on the internet these days!

                                                                                  P1000169.JPG

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 3
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. The Mod Squad
                                                                                  4. Squirt modification
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0