Stainless Huntsman
-
I had started documenting this elsewhere but to save monopolising the SAK mods thread and seeing as it's my first mod for someone else, here's a new one.
Roughing out the scales:
<a href="https://flic.kr/p/mGm7tX" target="_blank" rel="noopener noreferrer"><img src="https://farm4.staticflickr.com/3724/13583719245_a4860b5b29_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Donor Swiss Champ, ready for strip down:
<a href="https://flic.kr/p/mJBXSK" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7207/13609445075_1a45824e00.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>First test fit of parts:
<a href="https://flic.kr/p/mJDGiU" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7016/13609782934_a46d4782fd_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>I've got the layers reversed (oops!) and no tools on the back, but this is basically what it'll look like.
Large blade/small blade with corkscrew
Saw with chisel
Scissors with hook
Cap lifter/philips with awlThe philips driver is too thick and needs to come down further into the knife when closed, but it'll work with some fettling.
Getting close to finishing the one side, but some issues to resolve first. File marks to remove from the chamfer:
<a href="https://flic.kr/p/mLsZJf" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7102/13630328294_1da5290e31_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="https://flic.kr/p/mLt2wJ" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7396/13630334354_b2c6ca8e3f_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Marks on the surface of the scale that will need sanding out:
<a href="https://flic.kr/p/mLrc8c" target="_blank" rel="noopener noreferrer"><img src="https://farm4.staticflickr.com/3804/13629976405_3e54ba9003_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -

Looking good - I will keep an eye on this.
-
Good work and keep it up! :D I love seeing what others come up with.
I used to file the edges to round them over, but I got better using a belt grinder and it's my preferred method now. Then lots of sanding. :D
-
How did you get the Phillips across for the cap lifter? Isn't the Phillips a bit thicker?
-
@Syph007 said:
I used to file the edges to round them over, but I got better using a belt grinder and it's my preferred method now. Then lots of sanding. :DIt's easier than I thought but still takes some time. The stainless, being harder than aluminium, is actually quite forgiving. One slip is less likely to wreck the scale. I think I need to get a belt sander - they're about £80 in the UK.
@Fattsgalore said:
How did you get the Phillips across for the cap lifter? Isn't the Phillips a bit thicker?Yes, it is. I need to sand the sides of the Phillips down so it's the same thickness as the cap lifter. Crackout did the same mod here: </post/634539>
-
Got a better finish on the shield scale now:
<a href="https://flic.kr/p/mQ5rzA" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7314/13671193664_b32ea739fd_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Have also cut, sanded and polished the corkscrew side but it needs doing again as there are a few marks from the Dremel that need to come out. Stainless can be pretty hard to get right, it seems. -
Getting the philips to fit took a while. Lots of grinding and filing to thin it down to 2mm (to match the cap lifter/flat driver) then filing the stop to get it to sit nicely when closed:
<a href="https://flic.kr/p/mYrBVX" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7035/13765857805_3ede2c748d_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/mYrErZ" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7225/13765866275_4343e6ced7_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I might bring it down a touch more yet - need to compare with an existing knife to check the height. -
very nice work,
yes, stainless can be a pain to get a flawless polish on, but looks amazing if you do.
-
Philips finished, first test fit of all the parts:
<a href="https://flic.kr/p/mZhe8e" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7111/13775341575_05f2a76801_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/mZheRD" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7101/13775344035_3990877b16_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I moved the philips/cap lifter layer inwards so the philips would clear the scales. All nail nicks on the back still accessible. It'll be thinner than shown too, the two outermost aluminium liners won't be included. Next thing is to drill out the tools to 3mm and make the pivots, but that'll have to wait until next week. -
Hats off to you - it looks amazing. Are you pleased with it so far?

-
Thanks! Yes, pretty happy so far. It's not perfect yet but I think I can do a pretty good job. The person I'm building it for is quite particular so I want to make sure that it meets her expectations.
-
Looks good so far.
live from Nate's mobile
-
Ah you already figured out what I was going to suggest, moving the phillips layer inward. The only reason the normal opener layer is on the outside is so the can opener can work, but once you remove that, its nicer to move it inwards.
-
Yep. Makes the driver easier to use too, I think. I don't think I'll thin down a Philips again though - too much effort and it now looks very skinny and a bit weedy. Next time I'll put the Phillips opposite the cap lifter and the can opener with two springs and some spacers.
-
This has slowed down a bit because I've been waiting to get my new power tools installed:
<a href="https://flic.kr/p/neib6s" target="_blank" rel="noopener noreferrer"><img src="https://farm6.staticflickr.com/5222/13933957436_757001c215_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Got all that sorted at the weekend but still waiting for fine belts for the sander, carbide drills, brass shim, M2 taps, countersink bits and some cutting oil to arrive. -
Cheap carbide drills... Have a look at these.
http://www.ebay.co.uk/itm/300889133342?
they are the ones I use and they are cheap as chips compared to 5 quid each.
nice range of sizes from 1.55mm to 6.5 in 0.05mm steps. and they aren't crap either.
-
@PTRSAK said:
Cheap carbide drills... Have a look at these.http://www.ebay.co.uk/itm/300889133342?
they are the ones I use and they are cheap as chips compared to 5 quid each.
nice range of sizes from 1.55mm to 6.5 in 0.05mm steps. and they aren't crap either.
Peter any estimate how many holes 1 bit would drill before its spent? I keep shopping around and trying different options, and some bits Ive had break on the first use, others Ive used up to 50 times fine. Ive been working out the cost per hole on various options. :D
-
hard to say, I bought a packet of 10 in 2.35mm to drill out the 2.2mm holes in SAK blades and springs when I couldn't get 2.2mm rod so I could use 3/32.
I have done quite a lot and only broken one and that was my fault in side loading it.
The one I an using now is as sharp as it was on the first hole. -
@PTRSAK said:
Cheap carbide drills... Have a look at these.http://www.ebay.co.uk/itm/300889133342?
they are the ones I use and they are cheap as chips compared to 5 quid each.
nice range of sizes from 1.55mm to 6.5 in 0.05mm steps. and they aren't crap either.
I think I'm going to get some of these. I've just broken the two carbide drills I got this afternoon. :'( Two problems: too much runout on the chuck of the pillar drill and too slow drill speed. Need to borrow a dial gauge from work to check the chuck.
Belt sander worked perfectly though - the fine aluminium oxide belts have given a great finish and the scales have polished up nicely.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


