Some old tools I got
-
- tools!
:)
- tools!
-
+1
<a href="http://s112.photobucket.com/user/sparky_415/media/hammerc.gif.html" target="_blank" rel="noopener noreferrer"><img src="http://i112.photobucket.com/albums/n184/sparky_415/hammerc.gif" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Nice haul!
I like to spoke shave and the bull dog plane. I got a couple or those types of drills. There great for small holes. Anything bigger than a 1/4 inch, you are better off using a brace and bit.live from Nate's mobile
-
Very nice tools.
I have a few old wood working tools that I inherited from my grandfather and I still use. Also his old work bench. I think I posted some pics of those before.I don't think I saw a spokeshave before.
After a bit of googling it looks like it's used for the same tasks as a drawknife. Correct? -
That's an awesome haul you managed to get there!!

-
@enki_ck said:
Very nice tools.
I have a few old wood working tools that I inherited from my grandfather and I still use. Also his old work bench. I think I posted some pics of those before.I don't think I saw a spokeshave before.
After a bit of googling it looks like it's used for the same tasks as a drawknife. Correct?Works the same way. There where used by wheelwrights a lot to make spokes for wagon wheels.
live from Nate's mobile
-
@ducttapetech said:
Anything bigger than a 1/4 inch, you are better off using a brace and bit.That's one thing I always want to pick up, but haven't seen any yet at yard sales.
@enki_ck said:
I don't think I saw a spokeshave before.
After a bit of googling it looks like it's used for the same tasks as a drawknife. Correct?From mt 5 minutes of experience, pretty much. But like planes the depth is limited so it's better for finer work, since there won't be any splitting or gouging.
I did some googling, and apparently that stanley plane is quite popular for restoring. Unfortunately it's missing the fence, the three sided thingy on the side is a spur used to cut wood grain to reduce tear out.
I'm not sure when would you use a saw set, the only cheap set I have is already set from the factory.
-
Anymore you don't. Back in the day, saw where not so easy to come by like now. So they would sharpen them and reset the angles. It should be able to set the teeth for crosscut and rip saws.
live from Nate's mobile
-
Two more pics of the two hand drills I have. The new (to me) one seems heavier duty with bigger chuck and larger crank wheel. The older one however has screw cap/space in handle for bit storage and dual pinion gear (for stability?). However the central knob shaft is pressed into the main tube, so impossible to take apart, whereas the old one is easily disassembled for cleaning/greasing. You can see the repair I had to do on the bottom side of crank handle.
I'm not sure if I should really clean/degrease them and perhaps spray a layer of clear coat to preserve the original paint, or just leave them as is.


@ducttapetech said:
Anymore you don't. Back in the day, saw where not so easy to come by like now. So they would sharpen them and reset the angles. It should be able to set the teeth for crosscut and rip saws.live from Nate's mobile
I sharpen the saws I have with a triangular file, but that doesn't change the teeth set. I guess you meant to actually ground new teeth into the saw blade itself?
-
@jzmtl said:
Two more pics of the two hand drills I have. The new (to me) one seems heavier duty with bigger chuck and larger crank wheel. The older one however has screw cap/space in handle for bit storage and dual pinion gear (for stability?). However the central knob shaft is pressed into the main tube, so impossible to take apart, whereas the old one is easily disassembled for cleaning/greasing. You can see the repair I had to do on the bottom side of crank handle.I'm not sure if I should really clean/degrease them and perhaps spray a layer of clear coat to preserve the original paint, or just leave them as is.


Anymore you don't. Back in the day, saw where not so easy to come by like now. So they would sharpen them and reset the angles. It should be able to set the teeth for crosscut and rip saws.
live from Nate's mobile
I sharpen the saws I have with a triangular file, but that doesn't change the teeth set. I guess you meant to actually ground new teeth into the saw blade itself?
That manly. Sometimes you hit something that bends the teeth and they would need reset.
live from Nate's mobile
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

