First Multitool. HELP!
-
I agree with a lot of what has been said already, including this
@detron said:
My personal recommendation from the list you provided is the Rebar.and this
@Lynn LeFey said:
the only tool I've needed at the range was a small screwdriverFor a few other options at or under $50 that might meet your needs, though, consider
-
Victorinox Deluxe Tinker
-
Victorinox Super Tinker or Climber plus a decent pair of needle nose pliers
Finally, don't get caught up in the seat belt cutter craze. Any decently sharp blade will cut through a seat belt, if the need arises.
-
-
For "leaving it in the car for occasional use" duty, I would suggest the Rebar. It'll be the biggest bash for your cash. I don't own one, but those who do generally love it.
The Skeletool is at its best when it's carried at all times. It's made to be quickly pulled out for those incidental jobs like cutting open a box or turning the odd bolt. It's made to eliminate all those trips to the junk drawer for a screwdriver or a pair of pliers. If you leave it in a central location like your car and have to go dig it out every time you need it, you're paying for carryability that you aren't going to use.
The Sidekick/Wingman are basically the same tool with a couple minor differences. I own a Wingman, and it's pretty good as long as you aren't cutting wire. Everything else--including the wire strippers--work very well. You get a lot of tool for your $30. I find myself reaching for my Wingman more often than my Wave, if for no other reason than the inside tools are easier to get to in the Wingman. That and since it was less than half the price of my Wave I don't feel as bad scratching it.
-
A lot has been said about the LM tools, so let me add this:
SOG Power Assist: This tool has three problems.
- If you have no tool cover, you can't hold it, if you have the tools are difficult to access
- It has too many sharp nooks (e.g. the locking buttons for the blades), so its uncomfortable to hold.
- Finally due to the Power-Assist its larger than it has to be (lower tool density).
Only recommended if you don't use it a lot and always with gloves.
-
The best MT in your list IMO would have to be the Rebar, I have the Super Tool 300 which is the same as the rebar but bigger. But it has not got one hand opening blades! If your willing to spend a bit more I recommend a LM Wave, the pliers aren't as good, but I think having scissors and one hand opening blades is a very fair trade off. And your probably gonna end up wanting a Wave in the future anyway.
But yeah, from your list and budget I'd get the Rebar for sure! :D
-
Can't comment on all the tools listed on your list, since I don't own all of them. But of the three I owned, Rebar, Wingman and Sidekick, I too do recommend Rebar for it general overall performance vs price.
Out of the box thinking, I will also agree with Nate j about Deluxe Tinker or Deluxe Climber, SAK's quality is without doubt the most consistent and great, for the last century, and you will always find one that fits the bill.
-
@comis said:
Can't comment on all the tools listed on your list, since I don't own all of them. But of the three I owned, Rebar, Wingman and Sidekick, I too do recommend Rebar for it general overall performance vs price.Out of the box thinking, I will also agree with Nate j about Deluxe Tinker or Deluxe Climber, SAK's quality is without doubt the most consistent and great, for the last century, and you will always find one that fits the bill.
I'd +1 that - Victorinox is second to none for quality and utility. There is so much choice too. Just work out what tools you need and go for it.
-
Not sure how much a wave costs your neck of the woods but its what I compare all mt's too,I'm also a fan of the sidekick as is good bang for the buck and isn't too bad quality wise ,if full sized pliers arnt a big deal the swisschamps a great sak,on a smaller scale the LM juice s2 is a handy pocket sized mt,I've only owned a Gerber mp600 a few days but I really like it,its been compared to a AK47 in build and reliability and I can see that
good luck 
-
Giong strictly off your list then I'd say Wingman/Sidekick you just need to decide between scissors or saw. If you do some looking you can get a Wave off fleabay within your price and have a great tool other wise the Rebar has a strong following. Welcome and best of luck

-
I am against multi-pliers. Why? Well built to tackle tough jobs...but the heads are too narrow for many task.
A good pair of slip joints standing by will be able to tackle more. Add a SAK and your good to go.
-
@Fattsgalore said:
I am against multi-pliers. Why? Well built to tackle tough jobs...but the heads are too narrow for many task.A good pair of slip joints standing by will be able to tackle more. Add a SAK and your good to go.
But in this case narrow heads are exactly what the OP wants
I also want strong pliers but they need to be small enough to get in to small pistols to remove jams.
As is often the case, what suits one person may not be the best solution for someone else .....
-
I am looking for a good multitool under the $50 mark.
Save another $20 and buy a Leatherman Wave.
I bought a multi-tool for the same purpose and am glad I ponied up
the extra money for the Wave. I use it almost daily around the house.I keep a Victorinox SwissTool Spirit in my truck/BugOut Bag.
I carry a SwissChamp in a horizontal nylon sheath and that gets the most
use of all. -
@Grail Knight said:
I am looking for a good multitool under the $50 mark.
Save another $20 and buy a Leatherman Wave.
I bought a multi-tool for the same purpose and am glad I ponied up
the extra money for the Wave. I use it almost daily around the house.I keep a Victorinox SwissTool Spirit in my truck/BugOut Bag.
I carry a SwissChamp in a horizontal nylon sheath and that gets the most
use of all.The Wave can be had for around $50 brand new. Shop around and remember, you get what you pay for! Invest in a Wave

-
Get a Wave.
-
@Grail Knight said:
I am looking for a good multitool under the $50 mark.
Save another $20 and buy a Leatherman Wave.
I bought a multi-tool for the same purpose and am glad I ponied up
the extra money for the Wave. I use it almost daily around the house.I keep a Victorinox SwissTool Spirit in my truck/BugOut Bag.
I carry a SwissChamp in a horizontal nylon sheath and that gets the most
use of all.The Wave can be had for around $50 brand new. Shop around and remember, you get what you pay for! Invest in a Wave

Agreed. I think you'd be happiest with getting a Wave.
-
I'm going to suggest that you check out the Gerber Crucial F.A.S.T. This tool is usually what I carry when I have to go to the range for requalification. It doesn't have many tools (rather long flat and crosshead screwdrivers, plus knife [which is spring assisted]), but they all open from the outside. The plier head is small/thin enough to reach inside most pistols to remove brass. I don't know how strong the plier head is, but for the range it works well for me. It fits well in the pocket (it has a clip) or range bag, and the price is sub $50.00.
-
@Mike 208 said:
I'm going to suggest that you check out the Gerber Crucial F.A.S.T. This tool is usually what I carry when I have to go to the range for requalification. It doesn't have many tools (rather long flat and crosshead screwdrivers, plus knife [which is spring assisted]), but they all open from the outside. The plier head is small/thin enough to reach inside most pistols to remove brass. I don't know how strong the plier head is, but for the range it works well for me. It fits well in the pocket (it has a clip) or range bag, and the price is sub $50.00.I just had to look up the FAST. Good looking tool aside from those partial serrations

-
The Wave and Rebar are the most universal and versatile options. Having OHO blades and the ability to use Torx/Hex bits makes the Wave even more versatile and the pliers are needle nose too. I don't own one but have a Surge and a Charge that are actually versions of it and appreciate the functionality and usability, regardless the fact that I find the Swisstools better (and they also cost less in my country than LMs but in the US it's the other way around). So the Rebar has serous competition in the form of the Spirit but neither Victorinox, nor SOG, nor Gerber produce something like the Wave. It takes a Charge or Surge to beat a Wave.
-
The Rebar is the best tool.
-
I dont know if you are able to buy from fleabay but here is a nice looking used Wave for $49
New BO Wave $59
I have no affiliation with these sellers nor have I bought from them please use your own judgement.
-
I'd say get a Rebar if you are looking for something new.
I'd also say get a decent used PST off ebay.
I used to carry my PST all the time in the Marines and used it on the range to disassemble/re-assemble my rifle and pistol when needed.
Not knocking the Wave, but with the Rebar and PST, I prefer their tool loadout for the range with the flat drivers, awl, file, 3d phillips driver.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login