Rebar Pliers.
-
When I received my Rebar last week several factors became evident.The first fact that was the this tool was the evolution of the original PST.Of course it had this generations refinements such as a tool locking feature and the replaceable wire cutters.Of course it was also larger but only just slightly.It was noticeably thicker,apparently a necessity of the design,which of course is acceptable,at least by me.
What was also apparent was the lack of polish of the pliers.I would assume that in order to keep this tool at its current price point,leaving tool marks was necessary.It did however bother me.So this morning I took to my shop and polished them.
Unfortunately my photography skills aren't up to par and what I did may not be readily visible.Well anyway here they are.
-
Good job there. Maybe some pics with the whole tool will evidence the polishing better.
As for me, don't know why, but I like the rough finish on the pliers head.
-
@jacktrades said:
Good job there. Maybe some pics with the whole tool will evidence the polishing better.
As for me, don't know why, but I like the rough finish on the pliers head.Maybe polish wasn't the correct term.I just wanted to remove the really deep machine marks left from manufacture.I only used 220 and then 320 on my 6x48 belt sander.
If my photography skills were better,you would see the finer marks left by the sander.
-
More.

-
Yeah,
I see it now, and like it very much
Just meant i don't like mirror or close to mirror finishes, and yours is far from that.
Again, great job
-
@jacktrades said:
Yeah,
I see it now, and like it very much
Just meant i don't like mirror or close to mirror finishes, and yours is far from that.
Again, great job
Thanks.
If I would have though to take a "before" picture,the difference would be readily apparent.
Maybe some good member could post a picture of their stock Rebar to more clearly illustrate the difference.
-
not new photos, but hey
<a href="http://s303.photobucket.com/user/jacktrades_nbk/media/rebar/IMG_8430_zps735b5a8a.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i303.photobucket.com/albums/nn140/jacktrades_nbk/rebar/IMG_8430_zps735b5a8a.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s303.photobucket.com/user/jacktrades_nbk/media/rebar/IMG_8429_zps050c805c.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i303.photobucket.com/albums/nn140/jacktrades_nbk/rebar/IMG_8429_zps050c805c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s303.photobucket.com/user/jacktrades_nbk/media/rebar/IMG_8426_zps0174d778.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i303.photobucket.com/albums/nn140/jacktrades_nbk/rebar/IMG_8426_zps0174d778.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s303.photobucket.com/user/jacktrades_nbk/media/rebar/IMG_8417_zps8c538474.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i303.photobucket.com/albums/nn140/jacktrades_nbk/rebar/IMG_8417_zps8c538474.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s303.photobucket.com/user/jacktrades_nbk/media/rebar/IMG_8412_zps1a65a33e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i303.photobucket.com/albums/nn140/jacktrades_nbk/rebar/IMG_8412_zps1a65a33e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s303.photobucket.com/user/jacktrades_nbk/media/rebar/IMG_8409_zps37a1d6da.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i303.photobucket.com/albums/nn140/jacktrades_nbk/rebar/IMG_8409_zps37a1d6da.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s303.photobucket.com/user/jacktrades_nbk/media/rebar/IMG_8407_zps3a6bf9b8.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i303.photobucket.com/albums/nn140/jacktrades_nbk/rebar/IMG_8407_zps3a6bf9b8.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s303.photobucket.com/user/jacktrades_nbk/media/rebar/IMG_8365_zpsbd8b2677.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i303.photobucket.com/albums/nn140/jacktrades_nbk/rebar/IMG_8365_zpsbd8b2677.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Thanks for the pictures.Great photography!
Your fourth picture from the top shows the side of the jaws of the pliers.It also appears that your Rebar doesn't have the deep machine marks that mine had.Perhaps it was a fluke that mine had such egregious tool marks or maybe that's why the former owner decided to sell.I may never know.Anyway the Rebar has had those tool marks removed.

-
Looks great toolguy.

-
Thanks.
-
Speaking of finishes, does anyone find the Rebar's tools have an odd matte finish, like aluminium? My PST II had a shinier surface. I wonder if they're saving manufacturing costs, or trying to make the tool more tactical, like the black models?
Also, does anyone know what the things on the inside of the handles, next to the pliers, do? They seem riveted to the handles.
-
Could be for cutting down the cost, i like them like that.
I think those are the springs that keep the pliers head in, or out. -
has been talked about it here, </topic/30927
post 164 -
Oh so to strengthen the pliers? Hmm I'm torn between the stronger, improved design and the simpler, less susceptible to dirt and rust older design.
Another possible reason for the surface could be the steel. Are all the tools made of 420HC, or only the knives?
-
I believe they're all made out of 420HC.
The difference in appearance is that the outsides of the Rebar pliers are pretty much the raw casting but the Wave pliers are machined down in a cool spinny grindy thing. There's a video somewhere.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login