Universal Tool Adapter.
-
AFAIK, there are two versions of UTA, the earlier model will only fit a selected few models, while the latest one will fit almost most MT you see nowadays. But both are discontinued for while, as you probably may have known. :)
-
Any way to tell the two apart? I own a surge, MUT and skeletool. I considered modding it. But I cringe at the thought of modding a discontinued tool.
-
You want the later one (Universal Tool Adapter or UTA). The early one (standard Tool Adapter) has two dimple/lumps and a lug on the side at right angles to the main body of the adapter, and only fits the older LM MTs with the skinny handles.
The early one is on the left, the later one (that will fit a Surge) is on the right in the picture in this post:
</post/288698> -
Below is a good thread about the two with a Standard Tool Adapter modded to work with newer LM like the UTA. Got some good pictures ofthem with several LM tools.
</topic/39869
You can still find both versions every now and then on ebay as I got one of each a couple of months ago. I've got a total of 3 Standard Tool Adapters and 1 Universal Tool Adapter.
The UTA/STA can't be used with the Leatherman OHT for obvious reasons.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login