Leatherman loctite question.
-
Yes. I use a lighter to warm up the bolt area. Make sure you do not heat it more than you need. It does not need to get glowing red hot.
taaaaaaapaaaaaaas
-
Awesome thanks. Oh another question is the wave also held together with red loctite?
-
When I took apart a Wave, a few years ago, the bolts were glued. I assume that they still do it.
-
yup, every LM tool I've taken apart had red loctite on the screws. Rebars, Waves (old and new), various Charges, Sidekick/Wingman, Core, Sideclip, etc....
@dks said:
Yes. I use a lighter to warm up the bolt area. Make sure you do not heat it more than you need. It does not need to get glowing red hot.I use the same method as dks -- a lighter (I use a Zippo) held to the screw for 8-10 seconds seems to be more than enough to loosen things up.
when putting tools back together, I like to use the blue loctite. prevents the screws from coming loose, but it's easier to loosen up when I invariably end up taking the tool apart again. :D
-
@dks said:
When I took apart a Wave, a few years ago, the bolts were glued. I assume that they still do it.The red loctite over time looks like glue when taken apart ;)
A bit of heat, lighter, torch, soldering iron undo that mess.
As Breezy says, blue loctite after some time to set up, its PERFECT for LM reassembly.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login