Bike Tools!
-
Cooltool still works for me thanks to Farmman

-
I got myself a Topeak Hexus 16 (I think) after my chain broke in the middle of nowhere and I had to freewheel/be towed/walk for a few hillly kilometres.
My mate at a bike shop recommended it, saying it has everything you need and nothing you don't (he had more expensive ones he could have sold me). I'm not sure where it sits in relation to the Alien.I would prefer a dedicated Bike/Bike tool section too... ususally that sort of stuff ends up in the Outdoor Section but here we are in General Tool Discussion...
-
Here's mine:
<a href="https://www.flickr.com/photos/26008756@N08/14114439284/" target="_blank" rel="noopener noreferrer"><img src="https://farm3.staticflickr.com/2936/14114439284_f8b96a6e4f_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Duct tape
Puncture glue and sandpaper
Patches (traditional and self adhesive)
6" square of tyvek for patching cut tyres
Short length of chain and a quick link
Oil (in a takeaway sushi soy sauce bottle - enough to oil the chain twice, just)
6mm - 8mm Allen key adaptor
Spare chainring bolt
Spare SPD cleat bolt
Cable ties
Compact SAKNow using a Rebar for the pliers/cutters
Crank Bros Multi 17 tool, cut down to remove the Phillips and flat drivers and the Allen keys I don't need
Tyre levers
Buff
Spare tube (one for short rides, two for commuting and longer rides)
All of this fits in a small saddle bag or a side pocket on my big commuting saddle bag -
I recognized early on that there were a significant number of bike tools available and that it was a category that we really needed to address. I had a few different bike tools myself, although I didn't have a bike I still felt they were useful for EDC because of the allen wrenches on them.
I wanted to include a section for bike specific multitools and we started a sub forum called The Cycle Path, which unfortunately didn't see a lot of tool specific traffic, and became more about the bikes and bike trips than it was about tools. Eventually it was changed to the Outdoor Edge so that I could post some kayaking adventures in there and we could get some hiking stuff etc.
I'll dig out a few of mine (I'd planned to anyway, since I now have a bike!) and see about posting some photos. :D
Def
-
Thanks for weighing in, Grant!
I knew this topic had to have been addressed before. So what basically needs to happen is, members with bike tools need to start threads, with reviews and photo tours of bike tools in the Outdoor Edge, and maybe when there are enough bike tool specific threads - we could see a dedicated section? Lolhttps://www.serfas.com/products/view/127/referer:products|index|bags-tools|mini-tools
This is the little guy that I carry. Minimalist, but it is useful. I also have to carry a separate chain breaker, a separate spoke wrench, and a dedicated T25. I would rather have it all on one unit. Serfas has some really trick stuff. Some of their mini tools have a CO2 inflator incorporated into the tool! :o
-
Currently, I carry a small wrench, pair of slip joint pliers, a bike tool with allen keys, two tire levers, patch kit, a spare tube and a Micra.
-
I don't really have any bike specific tools.. But looking at them, it seems they try to be too much one-for-all... I mean, I know bikes have lots of different allen heads, but how many different ones can be on one bike? Not more than 4, I'd say, right? I'd like it if they were a bit more personalizeable, so it would suit a bike without being overly bulky.
Of course, I don't have any experience with bike tools, this is just an observation from afar.
-
Mine has 3, 4, 5, 6, 8 and 10mm Allen heads, T25 Torx, Phillips and 8mm hex. OK, so I don't need the 10mm Allen key often, but all the others are necessary.
-
@hiraethus said:
Mine has 3, 4, 5, 6, 8 and 10mm Allen heads, T25 Torx, Phillips and 8mm hex. OK, so I don't need the 10mm Allen key often, but all the others are necessary.Maybe someone needs to
some bike manufacturers, then.. 
-
I am with you totally bmot; it would be nice if bikes had a standardized type/size of screws and bolts. If everything on the bike were made by the same company, they might be. However, the wheels, brakes, shifters, deraileurs, chains, shock and forks, et cetera, can all sometimes be made by different entities.
Also, if people could personalize their tool (where have we talked about this before? Lol) that would be amazing. I really don't need a Philips and slotted screwdriver on my bike tool - I will have a MT with that already has those.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




