6mm & ¼ ''
-
@WWW said:
That is pretty much it, my describing skills are close to non existing so excuse me fabout that! :P The hexagonal sockets on yours are of different sizes? And thanks for the link, I may need to grab one of those, 300mm is hard to find around here.Yes, makes the screwdriver even more usefull

I will try to find mine tomorrowAprox where in the world are you WWW?
Thomas you are as always very generous

-
Very nice
, that Bosch kit rocks -
I never thought this topic would appear here on a forum for MTs & SAKs
7 years ago I went on a wild spending spree for over a year buying anything and everything that contained 1\4" bits
I'll have a look in the garage to see where I put them all. All I know is that I went after quality stuff from the likes of Hilti, Wera, Wiha, Ruko etc etc.
I don't actually know how it all came about, but back then you could get serious bargains off ebay.
-
I've had Wera, Bahco and Bosch.
I no longer have the Wera sadly, but it's really nice. Whether it's worth twice the amount I don't know.
The Bosch one is in Sparky's picture above. It's pretty good, but I found the ratchet a bit annoying.
The Bahco one is only about £2 more than the Bosch one, comes in a nicer case and the ratchet is a bit better. Whilst there's nothing wrong with the Bosch, if I was buying another one I'd get this again. -
That is pretty much it, my describing skills are close to non existing so excuse me fabout that! :P The hexagonal sockets on yours are of different sizes? And thanks for the link, I may need to grab one of those, 300mm is hard to find around here.
Yes, makes the screwdriver even more usefull

I will try to find mine tomorrowAprox where in the world are you WWW?
Thomas you are as always very generous

On the brazilian side...
-
From what I know, Wera, as a traditional tool maker, is producing their own bits and tools. I am not sure about Bahco, but Bosch just buys those bits and bit holders - They are producing very good power tools, but the bit and drill sets are a hit and miss, depending on the supplier.
-
@lowtech said:
From what I know, Wera, as a traditional tool maker, is producing their own bits and tools. I am not sure about Bahco, but Bosch just buys those bits and bit holders - They are producing very good power tools, but the bit and drill sets are a hit and miss, depending on the supplier.Very true what you said about the Bosch bits and drills. I think is a bit of a miss on their part, it makes them look bad to me. We have a 50 bucks set with a bunch of wood, metal and masonry drill bits and a few other odds and ends that are just terrible.
-
I have the usual collection that grows over the years, most stored/lost in any drawers or boxes.
Additional a small plastic box with all those loose bits i use with my accu drill. But this is my most used set when it comes down to hand tools.
It´s nice and small, still capable - and easy stored in a backpack if you need to move and want a basic set to be with you. Not cheap, but i love it.



-
Facom makes NICE
toystools! -
Indeed.


-
Mmmmmmmm

-
@sparky415 said:
Mmmmmmmm

If you like that, you will love this: </post/944647>
But i understand your reaction, i have the same each time i open one of the drawers.
:D -
Most of the time i use my 18V Dewalt impact for driving screws. A while back i bought a Workpro screwdriver it came with a bit set and a nice flex shaft. The Workpro works like any other ratcheting screwdriver but also has cool feature if you hold the shank when using it either way you turn the handle the bit turns one way it is very fast for a manual screwdriver.
Mike -
@Mike 56 said:
Most of the time i use my 18V Dewalt impact for driving screws. A while back i bought a Workpro screwdriver it came with a bit set and a nice flex shaft. The Workpro works like any other ratcheting screwdriver but also has cool feature if you hold the shank when using it either way you turn the handle the bit turns one way it is very fast for a manual screwdriver.
MikeSounds clever

@lowtech said:
If you have a thing for 1/4 inch bits/holders etc, I think I might have something for you.
PM me your address and see what the Mailman brings...
-
I keep forgetting to take some pics for this thread.

-
-
You definately need more pairs of hands. :D

-
When it comes to tools you can't have too many options

-
@sparky415 said:
When it comes to tools you can't have too many options
You can, ask me how I know

Reminds me of that saying...
"Be Careful What You Wish For, You Might Actually Get It"!It was fun hoarding them all, but its a pain in the ass living with them. I can't shift for bloody tools .....Arrgh :ahhh
As a colleague so eloquently once put it.
" Tha's got more effing tools than sad Mick an' that's sayin' sommat "!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



